Process Fluid / Product Pumping pumps made by Industry Leaders

Hydro Innovations is in an excellent position to supply the right process pump because of our access to Gorman-Rupp’s G Series Rotary Gear Pump, and Ragazzini’s Rotho Pump.

Pumps are able to handle most liquids or pastes required by the food industry, including: food oils, syrups, emulsions, liquid sugars, honey, concetrates, chocolate, shortening, pastes, chemicals, fats, refrigeration liquids, brewers yeast, brine and many more.

Gorman-Rupp Rotary Gear Pumps Deliver Reliable, Long-Lasting Performance.

The quality manufacturing and testing that go into every G Series pump guarantee long-lasting, trouble-free operation. If you need a replacement part for any of our products, you’ll have it fast.

Our products offer safer, more cost effective tailored solutions in the following areas:

Abattoir Wastewater

Wastewater pumping with Gorman-Rupp self-priming centrifugal pumps. Rugged and reliable, Gorman-Rupp pumps have large internal passages that enable them to handle ear tags, gloves and paunch pumping applications that would cause issues with most other pumps.

  • pump ear tags, paunch
  • self-priming
  • rugged and reliable

Read more

Abattoir Lagoon Aeration

By using Venturi-Aerators, asset owners can reduce WHS risks and lower maintenance costs when compared with surface mounted aerators. Venturi-Aerators can produce the desired level of mixing and dissolved oxygen with all the equipment located on the banks of lagoons/ponds, not in/on them.

  • Reduce DO
  • no chemicals
  • works fast

Read more

Abattoir Grey Water

Gorman-Rupp greywater pumps are self-priming with [limited] solids handling capabilities. They are high-efficiency pumps with a removable inspection cover-plate.

  • self-priming
  • high-efficiency pumps
  • removable inspection cover

Read more

Our expert team is standing by for any questions you have about how best to configure your pump system.

Cedar Meats Australia very happy with Hydro Innovations pump solutions

Reduced energy consumption with innovative DAF Pump for Waste Water Management

Cedars Meats were impressed with the simplicity of the dissolved air flotation system and promptly arranged the purchase of an EDUR DAF pump. They have been pleased with the positive results, which include:

  • A higher rate of solids removed
  • less power used for the job (reducing power costs)
  • less complicated controls
  • low maintenance future ahead for the system


Mr Yogesh Mistry
Chief Engineer at Cedar Meats

Our clients:


Watch how Ragazzini pump features make pumping simple and efficient. See Ragazzini Pump features and how they are beneficial

See where the leading edge technology starts, high quality, sustainable manufacturing through to the finished product in this Ragazzini Introductory video

Ask Our team »

Ready to build the perfect pump system for your project? We’re standing by to help.

Hydro Innovations is proud to distribute a broad range of quality, reliable and industry-leading industrial pumps and aerators.

Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, and invests heavily in R&D, and in training for their international representatives – like Hydro Innovations.

This puts us in an excellent position to make the very best recommendations for our Australian customers.

Our other suppliers, Ragazzini of Italy and EDUR of Germany, are also world leaders in their respective technologies (Peristaltic Pumps – Ragazzini, and Specialist centrifugal pumps – EDUR).

We carry a very large inventory of pumps and spare parts for all of these brands, to help us to deliver industry-leading service.

Ragazzini pumps:

Ask Our Team

The Gorman-Rupp G Series range of self priming positive displacement rotary gear pumps is designed to provide superior performance in the transfer of process fluids, unmatched in the industry. Available in Medium-Duty , Heavy-Duty and Extreme-Duty (abrasive service) models, pump materials include cast iron, cast steel and stainless steel.

G Series self priming pumps are manufactured with unique features that enable them to perform better and last longer on countless applications, providing quality and reliability that make the G Series the premier pump in the industry.

Advantages include:

  • An automatic idler pin lubrication system uses the pumped fluid to continuously cool and lubricate the idler pin and bush to reduce wear in this area.
  • An internal seal cavity venting system provides a continuous flow of liquid through the seal area, ensuring cooling and reducing pressure. This reduces seal face
  • load, increasing seal life.
  • A deep “end-feed” area offers superior priming performance under low inlet pressure conditions and/or high viscosity liquids.
  • Easy to service
  • Viscosities to 440,000 cSt
  • Pressures to 20.7 bar (300 psi)
  • Flows to 2200 litres per minute
  • Handle a variety of liquids , including highly viscous, high temperature and abrasive fluids
  • Widest range of sealing options in the industry
  • High strength material eliminates the need for special steel fittings traditionally needed for viscous applications.
  • Widest range of housing ports
  • Widest range of bushing materials

Download the Brochure | Ask Our Team

Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.

They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the peristaltic pump.

Advantages include:

  • Handle a range of fluids including viscous products, abrasives and chemicals
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Accurate metering as well as high flows (to 180m3/hour)
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Ragazzini Peristaltic Pump are at the cutting edge of  “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:

  • Handle a range of applications  including food products, abrasives, chemicals and solids
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials  to handle food, pharmaceuticals, abrasive and/or corrosive fluids

Our Team is available to answer your pump query within the hour

Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.


or Call

(02) 9898 1800

Monday – Friday
9am – 5pm
Australia Wide

Ragazzini Italian peristaltic hose pump logo

Hydro Innovations is proud to distribute Ragazzini pumps in Australia.

Ragazzini have developed and engineered a range of pumps and associated equipment to suit an array of applications. After years of development, positive displacement pumps with a pumping action suitable for both delicate and extreme pumping has been crafted. Learn more about Ragazzini and our other partners »

News from Industry Leaders