Our NSW Regional Manager Phil Rothheudt had the privilege of watching the team from ACT Emergency Services operate our Gorman-Rupp T-Series pump to fill fire fighting aircraft at their Canberra Airport facility (adjacent to RAAF base).
The planes that were being filled were SEAT aircraft (acronym for Single Engine Attack Tanker) and take about 3500L which our pump was able to fill in 2 ¼ to 2 ½ minutes. This is a fantastic increase over the old pump which took 3 ½ minutes. A great result for ACT Emergency Services resulting in a significant reduction in turn-around time. Gorman-Rupp T-Series showing a massive performance improvement with a 35% reduction in filling time.
‘Using the Gorman-Rupp T4 pump, the fill took 14 ½ minutes, down from 23 minutes in the past. A 37% improvement!
The Problem
ACT Emergency Services needed to speed up their fill process using Gorman-Rupp pumps.The plan was to see how fast our pump could complete a fill of 16,000 L. Unfortunately the Bomber didn’t come in the day we were onsite. The fire situation is extremely “fluid” and aircraft can be deployed anywhere at any given moment; deployment is controlled by the teams fighting fires on the ground.
The Solution
The day was to become more exciting, there was hope one of the “Bomber” aircraft (LAT; Large Air Tanker), either a C130 Hercules or the RFS 737 would come in to fill up.
The fire situation is extremely “fluid” and aircraft can be deployed anywhere at any given moment; deployment is controlled by the teams fighting fires on the ground.
The whole aerial situation is controlled by the RJ85 aircraft.
This aircraft acts as the “air traffic controller” flying above the situation, guiding the SEATs and in particular the LAT (helicopters in use as well).
We have subsequently been advised by ACT Emergency Services that the opportunity eventually arrived to fill the 737 LAT(Large Air Tanker).
There are 3 different liquids deployed:
Straight water, straight from Hydrant at the air base, through our pump into the planes.
Retardant (phosphate); this is what you have seen on TV coming out of the 737- premixed on the ground (big white tanks in photos) then pumped into the aircraft.
Foam (Blaze Tamer 380) and water (in yesterday’s case), which is in a concentrated form, then “sucked in” and mixed with the water via a venturi on the suction hose of the pump.
Again using the Gorman-Rupp T4 pump, the fill took 14 ½ minutes, down from 23 minutes in the past. A 37% improvement!
The Results
Using the Gorman-Rupp T4 pump, the fill took 14 ½ minutes, down from 23 minutes in the past. A 37% improvement!
The staff at Hydro Innovations feel privileged to have supplied world leading Gorman Rupp pumps to support the fire-fighting effort.
How Gorman-Rupp T4 is helping fight fires in NSW video
The Pumps
The Gorman-Rupp Super T Series self priming centrifugal wastewater/sewage pump has been the world benchmark for this technology since 1963 (over 50 years!). They have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal.