Fuel Pumps Combining Efficiency, Reliability and Versatility
Proudly Distributed To The Australian Industry By Hydro Innovations
Gorman-Rupp Roto-Prime
Self Priming Centrifugal Fuel Pump Internal vane pump primes the line Automatically removes vapour locks and strips suction lines
80 Series Self Priming Pumps
Effluent and dirty water pump High efficiency 24/7 workhorse
O Series Basic Pump
Clean water and fuel Pump High pressures Power Takeoff driven options
EDUR LPG Transfer Pumps
Pressure to 20 Bar Bulk transfer of liquid gas
VGH Series
High Efficiency For Clean Liquids, Petroleum, Dirty Water & Mild Abrasives
Hydro Innovations offer the broadest range of fuel transfer solutions, from stripping suction lines, bulk transfer, flooded suction and below -ground fuel storage tank pumping.
Able to source pumps from two world-class suppliers [Gorman-Rupp of USA and EDUR of Germany], enables us to offer customers the perfect bulk fuel transfer pumping product.
The broad range of pumps means we can provide solutions involving petroleum products like gasoline, diesel, jet fuel, as well as ammonia, LPG, ethanol and many others.
Exclusive to Hydro Innovations
Hydro Innovations is proud to represent Gorman-Rupp in Australia. With a history dating back to 1933, the company still lives by the ideals the founders started the company under in that “It is our practice to only enter a field of pumping service when able to provide a superior product with better performance”. These ideals go into every fuel pump that is designed, manufactured and tested.
Exclusive to Hydro Innovations
Hydro Innovations is also proud to be the EDUR Pumps distributor in Australia. Also with a long history, dating back to 1927, EDUR engineers design high quality specialist pumps for niche applications. One of these is their line of LPG pumps. EDUR do not stock pumps, as each pump is built to customer requirements from components they hold in inventory. This way, customers get the right solution every time.
Roto-Prime Pumps
Roto-Prime priming assisted centrifugal pumps are specifically designed for pumping petroleum products, petrochemicals and solvents. Roto-Prime pumps are actually two pumps in one. A variable capacity vane pump, which quickly and automatically evacuates air and vapour, making the pump ideal for loading and off-loading transports and stripping hoses. It then has a standard centrifugal pump to efficiently move the liquid.
Whenever air or vapour is present at the start of the pumping operation, or when there is a loss of suction because of air or vapour during pumping, the priming pump automatically moves air and vapour from the suction line to the discharge line.
These pumps are available in 3”, 4” and 5” sizes, in single or double volute, and in ductile iron or cast steel construction. They can produce flows to 90 L/s at heads to 118m.
80 Series Pumps
Gorman-Rupp 80 Series heavy-duty pumps are designed for non-stop workloads. The straight-in suction design of these high-efficiency pumps guarantees positive self-priming and allows operation at higher suction levels than most other self-priming centrifugal pumps.
Liquid enters directly into the impeller eye. A suction check valve prevents in-line return flow when the pump is shut off, and because 80 Series pumps have few moving parts, maintenance is minimal. 80 Series pumps are standard with self-lubricated mechanical shaft seals and gasketing are available to assure compatibility to the product being pumped.
They are available in sizes 1 ¼” though to 6”, with flows to 100 L/s and heads to 60 metres.
80 Series pumps are also able to be coupled to small engines and called “Shield-A-Spark”. These pumps are designed to handle volatile fluids, with the gasoline engine version being UL approved.
0 Series Pumps
Gorman-Rupp 0 Series self-priming fuel pumps are high efficiency, closed impeller pumps. They are available as standard bare shaft pumps, but also as purpose designed units for use on aircraft re-fuelling vehicles.
Aircraft refuellers are available in three versions. Power take-off, two-step gearbox drive, and heavy-duty split shaft units.
Power take-off units are available in 2” and 3” sizes, with flows to 24 L/s and heads to 130 metres. Two-step gearbox units are available in 6” and 8” sizes, with maximum flow of 120 L/s and maximum head of 135 metres. The split-shaft units are available in 4” and 6” sizes, with maximum flow of 58 L/s and maximum head of 150 metres.
EDUR NH Series LPG Transfer Pumps
EDUR NH Series liquefied gas pumps are high-performance pumps for applications with significant differential pressures. They offer flows to 47 L/s, maximum discharge pressure of 21.6 bar, and a maximum operating pressure of 40 bar. Advantages of these pumps are as follows:
• High efficiencies
• Axial “thrust-free, open or load-relieved, closed impellers
• Compensation of radial forces due to diffuser elements in the ring housing
• Low NPSH values
• Low-pulsation transport of media
• Low noise
• Pump viscosities to 200 cSt
• ATEX-compliant design available
• Temperatures -50OC to 110OC
Gorman-Rupp VGH Series
Gorman-Rupp VG and VGH Series pumps are high-efficiency standard [end-suction] centrifugal pumps. VG Series are general purpose pumps used for handling clean fluids. They are available in cast iron construction and are suitable for a variety of duties.
VGH Series are heavy-duty pumps used on a variety of applications, including fuels, fuel oils, and ethanol [with special seals]. The pumps have ductile iron casings, cast iron impellers with replaceable iron wear rings, and tungsten carbide/ silicon carbide cartridge mechanical seals with fluorocarbon elastomers.
Pumps are available in sizes 1 ¼” through to 8”, with flows to 290 L/s and heads to 146 metres.