The World’s best pumps  for the Australian Mining Industry

Tough  pumps built for the mining industry

Our pumps serve your mining needs whilst offering safer, more cost-effective solutions.

From abrasive and corrosive chemicals to liquids containing large solids, our self priming pumps and other products give solutions in the following areas:

Hydro Innovations is able to provide a wide range of quality pumps to meet the requirements of many applications within the mining industry.

Our products offer safer, more cost effective tailored solutions in the following areas:

chemical wastewater pumps for Australian industry

Wastewater & Greywater pumps

Grey water and wastewater pumping with EDUR Torque-Flow Series pumps. Efficiently pump solids and effluent.

  • handle solids to 80mm
  • Compact “bloc” design
  • Handle Viscosity to 60cSt

EDUR Torque Flow

EDUR Industry Bloc

EDUR Stainless Bloc

EDUR Multistage

Lagoon Aeration

Aerating lagoons can be done simply with Gorman-Rupp Echo-Storm venturi aerator units. No need for compressors or blowers and units can be mounted on the bank of the lagoon or pond. WHS issues are greatly reduced while producing enough dissolved oxygen and mixing power to treat any size lagoon.

  • Reduce COD and BOD
  • Much easier access for monitoring and maintenance
  • Much improved WHS

Venturi Aerator

Lampo emergency response unit

Fluid Emergency Response

Lampo Emergency Response units are trailer mounted multi-purpose machines designed to speed up and simplify the deployment of emergency response equipment for municipalities, emergency services and contractors,  using only one vehicle.

  • Water/wastewater pump
  • Generator
  • Lighting tower
  • Compressor

Lampo Emergency Response Unit

cedars meats DAF pump tank

DAF Pumps

EDUR DAF pumps can remove much of the complications normally associated with DAF systems. With a DAF pump, you don’t need a compressor or air saturation [pressure] vessel. This removes the need for yearly pressure vessel inspections, improves WHS and lowers maintenance costs.

  • Lower maintenance costs
  • No compressor
  • No air separation [pressure] vessel



Hot and Cold Pumping

Cold  and Hot water pumping with EDUR centrifugal pumps. Built from 92 years experience, EDUR pumps are rugged and reliable with a wide range of pumping temperatures.

  • German engineering
  • Highly efficient
  • Temperatures -40 deg C to 140 deg C

EDUR Refrigerant Pump

EDUR Industry Bloc

EDUR Stainless Bloc

EDUR Multistage

ragazzini pumps for chemical transfer

Slurry Transfer

Slurry transfer can be simple and cost-effective using a Ragazzini peristaltic pump.

  • Handle abrasive media
  • Pump solids
  • Early leak detection

Ragazzini Peristaltic Pump

Ramparts P Series


Our expert team is standing by for any questions you have about how best to configure your abattoir pump system.

Reliable, dependable wastewater pumping service for over 20 years

“Inghams Enterprises Pty Ltd have used Gorman-Rupp pumps for over 20 years. Gorman-Rupp submersible pumps have provided reliable, dependable wastewater pumping service for our waste treatment processing plants in this time. Based on this experience we had no hesitation selecting Gorman-Rupp pumps for a new trade waste treatment plant at one of our NSW plants.”

David Jessup
Group Executive General Manager, Inghams Enterprises Pty Ltd

Our clients:

Ready to build the perfect pump system for your project? We’re standing by to help.

Over 88 years

Of Team Experience in Abattoir Pumping.

We bring you the technical knowledge & experience

Hydro Innovations are proud to distribute a broad range of quality, reliable industrial pumps and aerators for Australian Industry.

Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, Ragazzini manufacture quality Italian peristaltic pumps, EDUR are world leaders in DAF pump technology,  and Lampo by Euromacchine for emergency response.

Holding a very large inventory of pumps and spare parts allows us to deliver industry-leading service. With over 88 years combined experience in applying, selecting and troubleshooting pumps, we are also in a good position to help design the best and most cost-effective fluid transfer systems for our customers.

Pumps and Aerators for the Mining Industry:

Ask Our Team

The Gorman-Rupp G Series range of self priming positive displacement rotary gear pumps is designed to provide superior performance in the transfer of process fluids, unmatched in the industry. Available in Medium-Duty , Heavy-Duty and Extreme-Duty (abrasive service) models, gear pump materials include cast iron, cast steel and stainless steel.

G Series self priming pumps are manufactured with unique features that enable them to perform better and last longer on countless applications, providing quality and reliability that make the G Series the premier gear pump in the industry.

Advantages include:

  • An automatic idler pin lubrication system uses the pumped fluid to continuously cool and lubricate the idler pin and bush to reduce wear in this area.
  • An internal seal cavity venting system provides a continuous flow of liquid through the seal area, ensuring cooling and reducing pressure. This reduces seal face
  • load, increasing seal life.
  • A deep “end-feed” area offers superior priming performance under low inlet pressure conditions and/or high viscosity liquids.
  • Easy to service
  • Viscosities to 440,000 cSt
  • Pressures to 20.7 bar (300 psi)
  • Flows to 2200 litres per minute
  • Handle a variety of liquids , including highly viscous, high temperature and abrasive fluids
  • Widest range of sealing options in the industry
  • High strength gear material eliminates the need for special steel fittings traditionally needed for viscous applications.
  • Widest range of housing ports
  • Widest range of bushing materials

Ask Our Team

Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.

They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the peristaltic pump.

Advantages include:

  • Handle a range of fluids including viscous products, abrasives and chemicals
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Accurate metering as well as high flows (to 180m3/hour)
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Ragazzini Peristaltic Pump are at the cutting edge of  “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:

  • Handle a range of applications  including food products, abrasives, chemicals and solids
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials  to handle food, pharmaceuticals, abrasive and/or corrosive fluids

Ask Our Team

The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.

Advantages include:

  • Flows to 100 l/s
  • Heads to 35m
  • Handle solids sizes to 80mm
  • Handle temperatures from -40oC to 140oC
  • Handle Viscosity to 60cSt
  • Handle 15% solids
  • A variety of mechanical seals available to suit specific applications

Ask Our Team

Ask Our Team

The EDUR range of Stainless Bloc close-coupled centrifugal pumps are ideal for transporting corrosive fluids. Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.

Advantages include:

  • Full stainless steel construction
  • Flows to 60 l/s
  • Heads to 90m
  • Handle temperatures from -20oC to 110oC depending on model
  • Handle viscosity to 115 cSt
  • Handle solids content to 15%
  • Handle solids to 40mm depending on the model of centrifugal pump
  • Single and double mechanical seals available

Ask Our Team

The Gorman-Rupp 10 Series grey water pump range of self priming centrifugal pumps and effluent pumps have been delivering excellent service to industry since 1946. With large inspection cover to access pump internals for service or blockage removal and a very thick vaned solids handling impeller, the 10 Series grey water pump are the choice for many such as abattoir, concrete batch plant or chemical plant.

10 Series Grey water pump advantages:

  • Ability to mount high and dry above the wet well [not in it]
  • Capital cost savings over wet well/ dry well constructions
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Improved maintenance features to greatly reduce maintenance time and costs
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Ask Our Team

The EDUR LBU multiphase pump is a multi-stage centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of either C.I./ Bz/ SS, Nodular Cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction, so may be used to handle a variety of liquids.

Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).

Advantages include:

  • Liquid flows to 16 l/s
  • Gas content up to 20%
  • Cast iron/Bronze/Stainless steel, Nodular cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction
  • Completely replace the “old” DAF system with a single pump

Ask Our Team

The EDUR range of multi-stage self priming centrifugal pumps can self prime on suction lifts up to 7.5 metres, and deliver heads to 160m. These self priming pumps are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel) enabling them to pump corrosive fluids including seawater.

These Grey Water Pumps can be close or long-coupled.

Advantages include:

  • Self Priming to 7.5 metres
  • All Iron, All Bronze and All Stainless Steel construction
  • Flows to 80 l/s
  • Heads to 160m
  • Handle temperatures from -40oC to 90oC depending on model
  • Single and double mechanical seals available

Our Team is available to answer your pump query within the hour

Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.


or Call

(02) 9898 1800

Monday – Friday
9am – 5pm
Australia Wide

Gorman Rupp Pumps LogoHydro Innovations is proud to be the sole distributor of Gorman-Rupp pumps in Australia.

Gorman-Rupp is one of the world’s leading manufacturers of self-priming sewage pumps and wastewater pumping equipment, and has been for more than 75 years. They offer a diverse range of high performance, high-quality, reliable pumps and pumping systems required for lasting service in wastewater pumps, sewage pumps, industrial waste, petroleum, fire and OEM markets. Learn more about Gorman-Rupp and our other partners »

News from Chemical Industry Leaders