The best pumps in Australia for Paper and Packaging Industries

Quality pumps to meet the requirements of the paper and packaging industry

Devote vote more time to processing and less time on break-downs.

Our systems can be configured to deliver simple, straightforward results.

Hydro Innovations is able to provide a wide range of heavy-duty pumps in Australia to meet the requirements of the paper and packaging industry.

Our products offer safer, more cost effective tailored solutions in the following areas:

north bourke abattoir using gorman-rupp rugged and reliable centrifugal self priming pumps

Wastewater

Wastewater in the paper and packaging industry can be easily transferred with Gorman-Rupp self-priming centrifugal pumps. Gorman-Rupp pumps have the materials of construction to handle the aggressive wastewater of the Paper and Packaging industry. Harder materials for abrasive applications and also various stainless steel alloys to handle the more corrosive environments.

  • Easy maintenance
  • Lightweight cover plate
  • Less choking [with eradicator]

Gorman-Rupp Ultra V with Eradicator

Gorman-Rupp Super T with Eradicator

Gorman-Rupp Ultra V Series

Gorman-Rupp Super T Series

Gorman-Rupp grey water super u series

Grey Water Pumping

Grey water pumping is easier and cost-efficient with Gorman-Rupp Super U Series pumps. They can self-prime and re-prime, allowing them to be located “high and dry” above the wet well. They are high in efficiency and are easy to monitor and maintain.

  • Mounted above ground
  • High efficiencies
  • Easy maintenance
ragazzini pumps for chemical transfer

Dosing and Chemical Additives

Ragazzini peristaltic pumps can solve the various problems associated with dosing and transferring chemical additives. Ammonium peroxide, calcium sulphate, anti-foaming agents, hydrogen peroxide and potassium ferrocyanide can all be effectively transferred with the right hose element.

  • No mess hose changes
  • Early leak detection
  • Compatible hose materials with paper industry chemicals

Ragazzini Rotho Peristaltic Pump

cedars meats DAF pump tank

DAF Pumps

EDUR DAF pumps can remove much of the complications normally associated with DAF systems. With a DAF pump, you don’t need a compressor or air saturation [pressure] vessel. This removes the need for yearly pressure vessel inspections, improves WHS and lowers maintenance costs.

  • Lower maintenance costs
  • No compressor
  • No air separation [pressure] vessel

EDUR LBU

EDUR PBU

bank-mounted-venturi-aerator-for-lagoon-aeration

Lagoon Aeration

Aerating lagoons can be done simply with Venturi-Aeration units. No need for compressors or blowers and units can be mounted on the bank of the lagoon or pond. WHS issues are greatly reduced while producing enough dissolved oxygen and mixing power to treat any size lagoon.

  • Reduce COD and BOD
  • Much easier access for monitoring and maintenance
  • Much improved WHS

Venturi Aerator

Lampo emergency response unit

Fluid Emergency Response

Lampo Emergency Response units are trailer mounted multi-purpose machines designed to speed up and simplify the deployment of emergency response equipment for municipalities, emergency services and contractors,  using only one vehicle.

  • Water/wastewater pump
  • Generator
  • Lighting tower
  • Compressor

Lampo Emergency Response Unit

Hot and Cold Pumping

Cold  and Hot water pumping with EDUR centrifugal pumps. Built from 92 years experience, EDUR pumps are rugged and reliable with a wide range of pumping temperatures.

  • German engineering
  • Highly efficient
  • Temperatures -40 deg C to 140 deg C

EDUR Refrigerant Pump

Gorman-Rupp VG and VGH Series

EDUR Industry Bloc

EDUR Stainless Bloc

EDUR Multistage

Ramparts sludge pump for Australian Industry

Waste Chemical Sludge Transfer

Waste chemical sludge can be pumped effectively with Ramparts air-driven diaphragm pumps. Only three wetted moving parts and an “indestructible” pump body make for a cost-effective life cycle. A variety of linings enable the pumping of abrasive and/or corrosive media.

  • Self-priming pump to 6 metres
  • Handle slurries to 70% solids by volume
  • Superior solids handling design

Our expert team is standing by for any questions you have about how best to configure your pump or aeration system.

Visy packaging logo

Benefits of surface-mounted wastewater pumps over unreliable submersible pumps

Visy Packaging was having chronic reliability issues with their submersible wastewater pumps until they looked at Gorman-Rupp self-priming wastewater pumps, which had been recently been successfully installed at the Pacific Fair shopping centre.

Paul Carter, Engineering Manager,  quickly saw the benefit of surface-mounted pumps and the maintenance and reliability benefits that they offered. The existing submersibles couldn’t pump against backpressure and wouldn’t allow the design to be changed.

“The Gorman Rupp units have allowed us to achieve that, and we now have no issues with our system”

Paul Carter
Engineering Manager – Beverage and Food Can Visy Packaging

Our clients:

Ready to build the perfect pump system for your project? We’re standing by to help.

Over 88 years

Of Team Experience in Abattoir Pumping.

We bring you the technical knowledge & experience

Hydro Innovations are proud to distribute a broad range of quality, reliable industrial pumps and aerators for Australian Industry.

Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, Ragazzini manufacture quality Italian peristaltic pumps, EDUR are world leaders in DAF pump technology, and Venturi-Aerators for simple bank mounted aeration.

Holding a very large inventory of pumps and spare parts allows us to deliver industry-leading service. With over 88 years combined experience in applying, selecting and troubleshooting pumps, we are also in a good position to help design the best and most cost-effective fluid transfer systems for our customers.

Paper and Packing Pumps and Aerators:

The Gorman-Rupp Super T Series self-priming centrifugal wastewater/sewage pump has been the world benchmark for this technology since 1963 (>50 years). They have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal.

Advantages include:

  • Self-Priming pump has the ability to mount high and dry above the wet well (not in it)
  • Low cost of ownership
  • Greatly reduced OH&S issues – no more working over water/heights/cranes/heavy swinging weights
  • Surface-mounted pumps with easy access for monitoring or service
  • Advanced safety features including pressure relief valve to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

The Gorman-Rupp Super T Series sewage and wastewater pumps with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult to pump, solids in suspension (such as wet wipes, rags and feathers).

They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Super T Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

The Gorman-Rupp Ultra V Series solids handling sewage and wastewater pumps with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult to pump, solids in suspension (such as “wet wipes” , rags and feathers).

They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Ultra V Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Ragazzini Peristaltic Pump are at the cutting edge of  “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:

  • Handle a range of applications  including food products, abrasives, chemicals and solids
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials  to handle food, pharmaceuticals, abrasive and/or corrosive fluids

Ask Our Team

The Gorman-Rupp Super U Series self priming dewatering and grey water pumps combines the best features of quality trash pumps in Australia with increased fuel efficiency and higher heads to pump through smaller and/or longer discharge piping systems or overcome the losses in filter systems.

These centrifugal pumps have been designed for economical, heavy duty (24/7) trouble-free operation.

Advantages include:

  • Ability to mount high and dry above the water (not in it)(to 7.6m)
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids
  • Any engine brand required by the customer
  • Choice of skid or trailer mounted configuration

The Gorman-Rupp Super T Series self priming dewatering pump has been the world benchmark for this technology since 1963 (>50 years). These centrifugal pumps have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Advantages include:

Advantages include:

  • Ability to mount high and dry above the water (not in it)(to 7.6m)
  • LLow cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids
  • Any engine brand required by the customer Choice of skid or trailer mounted configuration
  • New Eradicator Solids Management System

Ask Our Team

The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.

Advantages include:

  • Flows to 100 l/s
  • Heads to 35m
  • Handle solids sizes to 80mm
  • Handle temperatures from -40oC to 140oC
  • Handle Viscosity to 60cSt
  • Handle 15% solids
  • A variety of mechanical seals available to suit specific applications

Ask Our Team

Ask Our Team

The Gorman-Rupp 10 Series grey water pump range of self priming centrifugal pumps and effluent pumps have been delivering excellent service to industry since 1946. With large inspection cover to access pump internals for service or blockage removal and a very thick vaned solids handling impeller, 10 Series pumps are the choice for many an abattoir, concrete batch plant or chemical plant.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Capital cost savings over wet well/ dry well constructions
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Improved maintenance features to greatly reduce maintenance time and costs
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Ask Our Team

The EDUR range of multi-stage self priming centrifugal pumps can self prime on suction lifts up to 7.5 metres, and deliver heads to 160m. These self priming pumps are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel) enabling them to pump corrosive fluids including seawater.

These Grey Water Pumps can be close or long-coupled.

Advantages include:

  • Self Priming to 7.5 metres
  • All Iron, All Bronze and All Stainless Steel construction
  • Flows to 80 l/s
  • Heads to 160m
  • Handle temperatures from -40oC to 90oC depending on model
  • Single and double mechanical seals available

Our Team is available to answer your pump query within the hour

Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.

Email

or Call

(02) 9898 1800

Monday – Friday
9am – 5pm
Australia Wide

Gorman Rupp Pumps LogoHydro Innovations is proud to be the sole distributor of Gorman-Rupp pumps in Australia.

Gorman-Rupp is one of the world’s leading manufacturers of self-priming sewage pumps and wastewater pumping equipment, and has been for more than 75 years. They offer a diverse range of high performance, high-quality, reliable pumps and pumping systems required for lasting service in wastewater pumps, sewage pumps, industrial waste, petroleum, fire and OEM markets. Learn more about Gorman-Rupp and our other partners »

Abattoir News from Industry Leaders