Devote more time to processing and less on clean-ups.
Our systems can be configured to deliver simple, straightforward results – allowing companies to devote more time to their processing and less on their clean-ups.
Hydro Innovations provide a wide range of quality pumps to meet the requirements of many applications within the Food and Beverage industry.
Our products offer safer, more cost effective tailored solutions in the following areas:

Wastewater Pumps
Wastewater pumping with Gorman-Rupp self-priming centrifugal pumps. Built for dependable service and reliable re-priming capabilities, Gorman-Rupp pumps are also the safest wastewater pump alternative, being mounted high and dry above the wet well sump with no cranes or hoists needed for monitoring or maintenance.
- Easy maintenance
- Lightweight cover plate
- Less choking [with eradicator]

Delicate or Solid Food Product Pumping
Shear sensitive, delicate product or product with solid particles can be effectively pumped with a Ragazzini peristaltic pump. Hoses are available in food-grade, chemical resistant and/or abrasion-resistant materials. These peristaltic pumps are a breeze to service and they have a fast leak detection system. Because they use rollers, there is no need for lubrication fluid in the casing. As there is no casing fluid, and leaks are detected quickly, the likelihood of contamination is low, and product loss can be kept to a minimum if there is a hose failure. Sensitive products and/or products with solid particles can be pumped with confidence because of the peristaltic pump’s non-emulsifying action and the free tube passage.
- FDA approved food grade hoses
- Early leak detection
- No seals or vales

Grey Water Pumps
Grey Water pumping with Gorman-Rupp Self-priming Super U Series pumps is a good WHS choice. Mounted above the wet well, operators don’t need to open wet well lids, deploy safety screens or enter confined spaces. Pumps offer high heads, high efficiency and solids handling capability.
- Mounted above ground
- High efficiencies
- Easy maintenance

Lagoon Aeration
Aerating Lagoons can be done from the bank with Gorman-Rupp Echo-Storm venturi aeration units, without the need for boats or large cranes to access them. Using Gorman-Rupp pumps to self-prime from the lagoons, then provide the flow and pressure to the Venturi Aeration units to produce the necessary levels of dissolved oxygen and mixing required.
- Reduce COD and BOD
- Much easier access for monitoring and maintenance
- Much improved WHS

Food Process and Product pumping
Food Process/Product pumping with a Gorman-Rupp rotary gear pump. Pump liquids with high temperatures, high viscosities, or high-pressure requirements.
- high temperature pumping
- high viscosity pumping
- high pressure pumping

Hot and Cold Pumping
Rely on EDUR centrifugal pumps for hot and cold water pumping applications. With high pressures and a wide range of pumping temperatures [-40OC to 140OC], EDUR pumps have got your application covered.
- German engineering
- Highly efficient
- Temperatures -40 deg C to 140 deg C

Water Emergency Response
Lampo Emergency Response units are trailer mounted multi-purpose machines designed to speed up and simplify the deployment of emergency response equipment for emergency clean-ups and contractors.
- Water/wastewater pump
- Generator
- Lighting tower
- Compressor

Sludge and Slurry Pumping
Waste sludges and slurries can be pumped effectively with Ramparts air-driven diaphragm pumps. Only three wetted moving parts and an “indestructible” pump body make for a cost-effective life cycle to pump your thick viscous liquids.
- indestructible pump body
- pump abrasives and/or corrosives
- single-acting air driven diaphragm pump.
Ramparts P Series Diaphragm Pump
Our expert team is standing by for any questions you have about how best to configure your pump or aeration system.

Looks like sh*t, but pump like Arnold Schwarzenegger!
All of the wastewater pumps are Gorman-Rupp brand, pump 24/7, and some had been in service for circa 30 years. Because they are surface mounted, operators can access them easily for monitoring and maintenance, and because they are cast, machined, assembled and tested in the USA, reliability, performance and parts support is guaranteed.
Trevor Egan
Engineering Manager, MC Herd
Our clients:






View Our Case Studies and Projects
Food and Beverage Pumps and Aerators:
Download the Brochure | Ask Our Team
The Gorman-Rupp Super T Series self-priming centrifugal wastewater/sewage pump has been the world benchmark for this technology since 1963 (>50 years). They have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal.
Advantages include:
- Self-Priming pump has the ability to mount high and dry above the wet well (not in it)
- Low cost of ownership
- Greatly reduced OH&S issues – no more working over water/heights/cranes/heavy swinging weights
- Surface-mounted pumps with easy access for monitoring or service
- Advanced safety features including pressure relief valve to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Super T Series pump with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult-to-pump, solids in suspension (such as wet wipes, rags and feathers).
They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Super T Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Ultra V Series solids handling sewage and wastewater pumps with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult to pump, solids in suspension (such as “wet wipes” , rags and feathers).
They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Ultra V Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Super U Series self priming dewatering and grey water pumps combines the best features of quality trash pumps in Australia with increased fuel efficiency and higher heads to pump through smaller and/or longer discharge piping systems or overcome the losses in filter systems.
These centrifugal pumps have been designed for economical, heavy duty (24/7) trouble-free operation.
Advantages include:
- Ability to mount high and dry above the water (not in it)(to 7.6m)
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
- Any engine brand required by the customer
- Choice of skid or trailer mounted configuration
Download the Brochure | Ask Our Team
Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.
They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the peristaltic pump.
Advantages include:
- Handle a range of fluids including viscous products, abrasives and chemicals
- High performance including pressures to 15 BAR, reversible flow, and suction lifts
- Accurate metering as well as high flows (to 180m3/hour)
- Easy maintenance including easy hose replacement and easy leak detection
- CIP with retractable rollers
- Greater operator safety
- Easy access for monitoring or service
- A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
Ragazzini Peristaltic Pump are at the cutting edge of “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:
- Handle a range of applications including food products, abrasives, chemicals and solids
- High performance including pressures to 15 BAR, reversible flow, and suction lifts
- Easy maintenance including easy hose replacement and easy leak detection
- CIP with retractable rollers
- Greater operator safety
- Easy access for monitoring or service
- A variety of hose materials to handle food, pharmaceuticals, abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The EDUR LBU multiphase pump is a multi-stage centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of either C.I./ Bz/ SS, Nodular Cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction, so may be used to handle a variety of liquids.
Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).
Advantages include:
- Liquid flows to 16 l/s
- Gas content up to 20%
- Cast iron/Bronze/Stainless steel, Nodular cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction
- Completely replace the “old” DAF system with a single pump
Download the Brochure | Ask Our Team
The EDUR PBU multiphase pump is a single-stage peripheral centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of stainless steel, so may be used to handle a variety of liquids. Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).
Advantages include:
- Liquid flows to 1 l/s
- Gas content up to 15%
- Stainless steel construction
- Completely replace the “old” DAF system with a single pump
Ask Our Team
The Gorman-Rupp G Series range of self priming positive displacement rotary gear pumps is designed to provide superior performance in the transfer of process fluids, unmatched in the industry. Available in Medium-Duty , Heavy-Duty and Extreme-Duty (abrasive service) models, pump materials include cast iron, cast steel and stainless steel.
G Series self priming pumps are manufactured with unique features that enable them to perform better and last longer on countless applications, providing quality and reliability that make the G Series the premier pump in the industry.
Advantages include:
- An automatic idler pin lubrication system uses the pumped fluid to continuously cool and lubricate the idler pin and bush to reduce wear in this area.
- An internal seal cavity venting system provides a continuous flow of liquid through the seal area, ensuring cooling and reducing pressure. This reduces seal face
- load, increasing seal life.
- A deep “end-feed” area offers superior priming performance under low inlet pressure conditions and/or high viscosity liquids.
- Easy to service
- Viscosities to 440,000 cSt
- Pressures to 20.7 bar (300 psi)
- Flows to 2200 litres per minute
- Handle a variety of liquids , including highly viscous, high temperature and abrasive fluids
- Widest range of sealing options in the industry
- High strength material eliminates the need for special steel fittings traditionally needed for viscous applications.
- Widest range of housing ports
- Widest range of bushing materials
Ask Our Team
The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.
Advantages include:
- Flows to 100 l/s
- Heads to 35m
- Handle solids sizes to 80mm
- Handle temperatures from -40oC to 140oC
- Handle Viscosity to 60cSt
- Handle 15% solids
- A variety of mechanical seals available to suit specific applications
Download the Brochure | Ask Our Team
Designing pumps since 1927, EDUR Pumpenfabrik has developed a range of pumps for use in refrigeration systems. They have been designed to provide a maximum level of safety, reliability and efficiency. They are the safe option because they use standard TEFC motors, which don’t need to be cooled using the pumped media. They are efficient because they use magnetic couplings. By using magnetic couplings energy is not wasted by pumping fluid over the motor [as with “canned motor pumps”] and back through to the separator.
Advantages include:
- Suitable for ammonia, C02, synthetic refrigerants and refrigerants containing hydrocarbons/li>
- No heat transfer from motor to pumped media/li>
- Low maintenance/li>
- Low NPSH values/li>
- Pulsation free operation/li>
- Long service life
Ask Our Team
The Gorman-Rupp 10 Series grey water pump range of self priming centrifugal pumps and effluent pumps have been delivering excellent service to industry since 1946. With large inspection cover to access pump internals for service or blockage removal and a very thick vaned solids handling impeller, the 10 Series grey water pump are the choice for many such as abattoir, concrete batch plant or chemical plant.
10 Series Grey water pump advantages:
- Ability to mount high and dry above the wet well [not in it]
- Capital cost savings over wet well/ dry well constructions
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Improved maintenance features to greatly reduce maintenance time and costs
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Our Team is available to answer your pump query within the hour
Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.
or Call
(02) 9898 1800
Monday – Friday
9am – 5pm
Australia Wide
Hydro Innovations is proud to be the sole distributor of Gorman-Rupp pumps in Australia.
Gorman-Rupp is one of the world’s leading manufacturers of self-priming sewage pumps and wastewater pumping equipment, and has been for more than 75 years. They offer a diverse range of high performance, high-quality, reliable pumps and pumping systems required for lasting service in wastewater pumps, sewage pumps, industrial waste, petroleum, fire and OEM markets.