Devote more time to processing and less on clean-ups.
Our systems can be configured to deliver simple, straightforward results – allowing companies to devote more time to their processing and less on their clean-ups.
Hydro Innovations provides a wide range of quality pumps in Australia to meet the requirements of many applications within the meat process industry that are essential for those in need of meat processing and wastewater treatment options. Our systems can be configured to deliver simple, straightforward results – allowing companies to devote more time to their processing and less on their clean-ups.
Our products offer safer, more cost effective, tailored solutions in the following areas:
Wastewater
Wastewater pumping with Gorman-Rupp self-priming centrifugal pumps. Rugged and reliable, Gorman-Rupp pumps have large internal passages that enable them to handle ear tags, gloves and paunch pumping applications that would cause issues with most other pumps.
- Easy maintenance
- Lightweight cover plate
- Less choking [with eradicator]
Gorman-Rupp Ultra V with Eradicator
Lagoon Aeration
By using Gorman-Rupp’s Echo-Storm aerators, asset owners can reduce WHS risks and lower maintenance costs when compared with surface mounted aerators. Venturi-Aerators can produce the desired level of mixing and dissolved oxygen with all the equipment located on the banks of lagoons/ponds, not in/on them.
- Reduce COD and BOD
- Much easier access for monitoring and maintenance
- Much improved WHS
Grey Water
Gorman-Rupp greywater pumps are self-priming with [limited] solids handling capabilities. They are high-efficiency pumps with a removable inspection cover-plate.
- Mounted above ground
- High efficiencies
- Easy maintenance
Blood Pumping
Blood Pumping is a tough application but can be effectively done using any of the following:
- a Gorman-Rupp 10 Series pump
- a Ragazzini Peristaltic pump
- or if the air is available, with a Ramparts single-acting air driven diaphragm pump.
Bone and Offal
The transportation of pre-broken bone and offal can be a costly area of production, which can be simplified using a Lamella pump from JS Proputec. The pre-broken product can be transported [un-manned] within fully enclosed pipelines.
- Pump without use of water
- Enclosed pipeline
- Reduced operator involvement
Hot and Cold Pumping
Hot and cold water abattoir pumping with EDUR centrifugal pumps. EDUR centrifugal pumps are rugged in construction and highly efficient. EDUR use hand-finished open impellers.
- German engineering
- Highly efficient
- Temperatures -40 deg C to 140 deg C
Water Emergency Response
Lampo Emergency Response units are trailer mounted multi-purpose machines designed to speed up and simplify the deployment of emergency response equipment for municipalities, emergency services and contractors, using only one vehicle.
- Water/wastewater pump
- Generator
- Lighting tower
- Compressor
Our expert team is standing by for any questions you have about how best to configure your abattoir pump system.
Our clients:
Reliable, dependable wastewater pumping service for over 20 years
“Inghams Enterprises Pty Ltd have used Gorman-Rupp pumps for over 20 years. Gorman-Rupp self-prining pumps have provided reliable, dependable wastewater pumping service for our waste treatment processing plants in this time. Based on this experience we had no hesitation selecting Gorman-Rupp pumps for a new trade waste treatment plant at one of our NSW plants.”
David Jessup
Group Executive General Manager, Inghams Enterprises Pty Ltd
Hydro Innovations is proud to distribute a broad range of quality, reliable and industry-leading industrial pumps and aerators.
We are also delighted to share that Hydro Innovations is proud to be the exclusive distributor of Gorman-Rupp Pumps.
Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, and invests heavily in R&D, and in training for their international representatives – like Hydro Innovations.
This puts us in an excellent position to make the very best recommendations for our Australian customers.
Our other suppliers, Ragazzini of Italy and EDUR of Germany, are also world leaders in their respective technologies (Peristaltic Pumps – Ragazzini, and Specialist centrifugal pumps – EDUR).
We carry a very large inventory of pumps and spare parts for all of these brands, to help us to deliver industry-leading service.
Abattoir Pumps & Aerators:
Download the Brochure | Ask Our Team
The EchoStorm water aerator from Gorman-Rupp offers the benefits of safety, reliability and ease of access to water aeration applications.
Because these units are mounted on the bank [instead of floating on the water or being submerged in it], access is much less complicated and safer, while delivering oxygen transfer outcomes.
The EchoStorm water aerator benefits::
- No cranes or row boats for maintenance
- Easily accessed
- Less downtime
- Reliable and easy to maintain
- Easily scalable and low cost of ownership
- Thorough mixing – no dead spots
- High SOTR (Standard Oxygen Transfer rate)
- Oxygenated water
These aeration units are used in conjunction with Gorman Rupp self-priming centrifugal pumps to deliver solutions for the following applications:
- Lagoon and basin water aerator
- Oxidation ditch aeration
- Lake destratification and algae control
- Odour control
- Sludge digestion
- Septage treatment
Download the Brochure | Ask Our Team
The Gorman-Rupp Super T Series self-priming centrifugal wastewater/sewage pump has been the world benchmark for this technology since 1963 (>50 years). They have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal.
Advantages include:
- Self-Priming pump has the ability to mount high and dry above the wet well (not in it)
- Low cost of ownership
- Greatly reduced OH&S issues – no more working over water/heights/cranes/heavy swinging weights
- Surface-mounted pumps with easy access for monitoring or service
- Advanced safety features including pressure relief valve to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Super T Series pump with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult-to-pump, solids in suspension (such as wet wipes, rags and feathers).
They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Super T Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.
They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the peristaltic pump.
Advantages include:
- Handle a range of fluids including viscous products, abrasives and chemicals
- High performance including pressures to 15 BAR, reversible flow, and suction lifts
- Accurate metering as well as high flows (to 180m3/hour)
- Easy maintenance including easy hose replacement and easy leak detection
- CIP with retractable rollers
- Greater operator safety
- Easy access for monitoring or service
- A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
Ragazzini Peristaltic Pump are at the cutting edge of “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:
- Handle a range of applications including food products, abrasives, chemicals and solids
- High performance including pressures to 15 BAR, reversible flow, and suction lifts
- Easy maintenance including easy hose replacement and easy leak detection
- CIP with retractable rollers
- Greater operator safety
- Easy access for monitoring or service
- A variety of hose materials to handle food, pharmaceuticals, abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Ultra V Series is the most advanced self-priming centrifugal wastewater and sewage pump range on the market today.
They are high performance, high head, and high-efficiency pumps, designed to deliver a long and low maintenance service life, with a low cost of ownership.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Efficiencies up to 20% higher than any other solids handling self primer
- Higher pressures (heads) (up to 300%) than any other solids handling self primer
- Greatly improved operator safety
- Easy access for monitoring or service
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Ask Our Team
The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.
Advantages include:
- Flows to 100 l/s
- Heads to 35m
- Handle solids sizes to 80mm
- Handle temperatures from -40oC to 140oC
- Handle Viscosity to 60cSt
- Handle 15% solids
- A variety of mechanical seals available to suit specific applications
Download the Brochure | Ask Our Team
The EDUR LBU multiphase pump is a multi-stage centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of either C.I./ Bz/ SS, Nodular Cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction, so may be used to handle a variety of liquids.
Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).
Advantages include:
- Liquid flows to 16 l/s
- Gas content up to 20%
- Cast iron/Bronze/Stainless steel, Nodular cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction
- Completely replace the “old” DAF system with a single pump
Download the Brochure | Ask Our Team
Designing pumps since 1927, EDUR Pumpenfabrik has developed a range of pumps for use in refrigeration systems. They have been designed to provide a maximum level of safety, reliability and efficiency. They are the safe option because they use standard TEFC motors, which don’t need to be cooled using the pumped media. They are efficient because they use magnetic couplings. By using magnetic couplings energy is not wasted by pumping fluid over the motor [as with “canned motor pumps”] and back through to the separator.
Advantages include:
- Suitable for ammonia, C02, synthetic refrigerants and refrigerants containing hydrocarbons/li>
- No heat transfer from motor to pumped media/li>
- Low maintenance/li>
- Low NPSH values/li>
- Pulsation free operation/li>
- Long service life
Download the Brochure | Ask Our Team
Designing pumps since 1927, EDUR Pumpenfabrik has developed a range of pumps for use in refrigeration systems. They have been designed to provide a maximum level of safety, reliability and efficiency. They are the safe option because they use standard TEFC motors, which don’t need to be cooled using the pumped media. They are efficient because they use magnetic couplings. By using magnetic couplings energy is not wasted by pumping fluid over the motor [as with “canned motor pumps”] and back through to the separator.
Advantages include:
- Suitable for ammonia, C02, synthetic refrigerants and refrigerants containing hydrocarbons/li>
- No heat transfer from motor to pumped media/li>
- Low maintenance/li>
- Low NPSH values/li>
- Pulsation free operation/li>
- Long service life
Ask Our Team
The EDUR range of multi-stage self priming centrifugal pumps can self prime on suction lifts up to 7.5 metres, and deliver heads to 160m. These self priming pumps are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel) enabling them to pump corrosive fluids including seawater.
These Grey Water Pumps can be close or long-coupled.
Advantages include:
- Self Priming to 7.5 metres
- All Iron, All Bronze and All Stainless Steel construction
- Flows to 80 l/s
- Heads to 160m
- Handle temperatures from -40oC to 90oC depending on model
- Single and double mechanical seals available
Ask Our Team
The Gorman-Rupp 10 Series grey water pump range of self priming centrifugal pumps and effluent pumps have been delivering excellent service to industry since 1946. With large inspection cover to access pump internals for service or blockage removal and a very thick vaned solids handling impeller, the 10 Series grey water pump are the choice for many such as abattoir, concrete batch plant or chemical plant.
10 Series Grey water pump advantages:
- Ability to mount high and dry above the wet well [not in it]
- Capital cost savings over wet well/ dry well constructions
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Improved maintenance features to greatly reduce maintenance time and costs
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Ask Our Team
The EDUR range of Industry Bloc close-coupled centrifugal pumps are ideal for pumping water and other clean and slightly polluted fluids. They are compact in size, and available in a variety of materials of construction including cast iron, bronze and stainless steel.
Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.
Advantages include:
- All Iron, All Bronze and All Stainless Steel construction
- Flows to 165 l/s
- Heads to 90m
- Handle temperatures from -40oC to 140oC depending on model
- Handle viscosity to 115 cSt
- Handle solids content to 15%
- Single and double mechanical seals available
- Surface Mounted Pump
Download the Brochure | Ask Our Team
The EDUR PBU multiphase pump is a single-stage peripheral centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of stainless steel, so may be used to handle a variety of liquids. Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).
Advantages include:
- Liquid flows to 1 l/s
- Gas content up to 15%
- Stainless steel construction
- Completely replace the “old” DAF system with a single pump
Our Team is available to answer your pump query within the hour
Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.
or Call
(02) 9898 1800
Monday – Friday
9am – 5pm
Australia Wide
Hydro Innovations is proud to distribute a broad range of quality, reliable and industry-leading industrial pumps and aerators.
Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, and invests heavily in R&D, and in training for their international representatives – like Hydro Innovations.
This puts us in an excellent position to make the very best recommendations for our Australian customers.
Our other suppliers, Ragazzini of Italy and EDUR of Germany, are also world leaders in their respective technologies (Peristaltic Pumps – Ragazzini, and Specialist centrifugal pumps – EDUR).
We carry a very large inventory of pumps and spare parts for all of these brands, to help us to deliver industry-leading service.