The World’s best pumps  for the Australian Chemical Industry

Corrosive resistant  pumps built tough for the chemical industry

Our pumps serve your chemical processing needs whilst offering safer, more cost-effective solutions.

From abrasive and corrosive chemicals to liquids containing large solids, our self priming pumps and other products give solutions in the following areas:

Hydro Innovations is able to provide a wide range of quality pumps in Australia to meet the requirements of many applications within the Chemical Industry. From abrasive and corrosive chemicals to liquids containing large solids, our self priming pumps and other products serve your chemical processing needs whilst offering safer, more cost-effective solutions in the following areas:

Our products offer safer, more cost effective tailored solutions in the following areas:

chemical wastewater pumps for Australian industry

Chemical Wastewater

Wastewater pumping with Gorman-Rupp self-priming centrifugal pumps. Capable of priming to depths of 7.6m, Gorman-Rupp pumps offer the best variety of materials for pumping aggressive wastewater from the Chemical manufacturing industry. Pumps can be supplied as “Stainless Steel Fitted”, “CD4MCu Fitted”, or pumps manufactured completely in CD4MCu [a duplex stainless steel]

  • pump aggressive wastewater
  • self-priming
  • rugged and reliable
pumps for Tanker unloading

Chemical Tanker Unloading

Tanker unloading can be done with Gorman-Rupp Rotary gear pumps. Thin or viscous fluids can be transferred at rates up to 2200 litres per minute. A variety of materials of construction enable the handling of a very wide range of chemicals.

  • self-priming
  • fast flow rate
  • variety of construction materials

Gorman-Rupp Rotary Gear Pumps

Gorman-Rupp grey water super u series

Chemical Grey Water Pumping

Greywater pumping is uncomplicated with Gorman-Rupp Super U Series pumps. They are self-priming, so only the suction line enters the wet well [not the entire pump]. They are available in cast iron or CD4MCu [duplex stainless steel] for aggressive chemical wastewater.

  • self-priming
  • high-efficiency pumps
  • cast iron or CD4MCu

Gorman-Rupp Super U Series

Gorman-Rupp Ultra V Series

Gorman-Rupp Super T Series

Gorman-Rupp 80 Series

EDUR Self Priming High Head Pump

cedars meats DAF pump tank

DAF Pumps

EDUR DAF pumps can remove much of the complications normally associated with DAF systems. With a DAF pump, you don’t need a compressor or air saturation [pressure] vessel. This removes the need for yearly pressure vessel inspections, improves WHS and lowers maintenance costs.

  • Lower maintenance costs
  • No compressor
  • No air separation [pressure] vessel

EDUR LBU

EDUR PBU

chemical sludge pumping

Waste Chemical Sludge

Waste chemical sludge can be pumped effectively with Ramparts air-driven diaphragm pumps. Only three wetted moving parts and an “indestructible” pump body make for a cost-effective life cycle. A variety of linings enable the pumping of abrasive and/or corrosive media.

  • “indestructible” pump body
  • pump abrasives and/or corrosives
  • single-acting air driven diaphragm pump.

Ramparts P Series Diaphragm Pump

Gorman-Rupp D Series Diaphragm Pump

ragazzini pumps for chemical transfer

Chemical Transfer

Chemical Transfer including contaminated chemicals or fluids with solid particles, can be done effectively with Ragazzini peristaltic pumps. A variety of tubular elements enable a wide variety of chemicals to be transferred.

  • easy hose replacement
  • leak detector
  • variety of hose materials

Ragazzini Peristaltic Pump

Hot and Cold Pumping

Cold  and Hot water pumping with EDUR centrifugal pumps. Built from 92 years experience, EDUR pumps are rugged and reliable with a wide range of pumping temperatures.

  • German engineering
  • Highly efficient
  • Temperatures -40 deg C to 140 deg C

EDUR Refrigerant Pump

Gorman-Rupp VG and VGH Series

EDUR Industry Bloc

EDUR Stainless Bloc

EDUR Multistage

Lampo emergency response unit

Fluid Emergency Response

Lampo Emergency Response units are trailer mounted multi-purpose machines designed to speed up and simplify the deployment of emergency response equipment for municipalities, emergency services and contractors,  using only one vehicle.

  • Water/wastewater pump
  • Generator
  • Lighting tower
  • Compressor

Lampo Emergency Response Unit

Our expert team is standing by for any questions you have about how best to configure your abattoir pump system.

Reliable, dependable wastewater pumping service for over 20 years

“Inghams Enterprises Pty Ltd have used Gorman-Rupp pumps for over 20 years. Gorman-Rupp submersible pumps have provided reliable, dependable wastewater pumping service for our waste treatment processing plants in this time. Based on this experience we had no hesitation selecting Gorman-Rupp pumps for a new trade waste treatment plant at one of our NSW plants.”

David Jessup
Group Executive General Manager, Inghams Enterprises Pty Ltd

Our clients:

Ready to build the perfect pump system for your project? We’re standing by to help.

Over 88 years

Of Team Experience in Abattoir Pumping.

We bring you the technical knowledge & experience

Hydro Innovations are proud to distribute a broad range of quality, reliable industrial pumps and aerators for Australian Industry.

Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, Ragazzini manufacture quality Italian peristaltic pumps, EDUR are world leaders in DAF pump technology,  and Lampo by Euromacchine for emergency response.

Holding a very large inventory of pumps and spare parts allows us to deliver industry-leading service. With over 88 years combined experience in applying, selecting and troubleshooting pumps, we are also in a good position to help design the best and most cost-effective fluid transfer systems for our customers.

Chemical Pumps & Aerators:

Ask Our Team

The Gorman-Rupp G Series range of self priming positive displacement rotary gear pumps is designed to provide superior performance in the transfer of process fluids, unmatched in the industry. Available in Medium-Duty , Heavy-Duty and Extreme-Duty (abrasive service) models, gear pump materials include cast iron, cast steel and stainless steel.

G Series self priming pumps are manufactured with unique features that enable them to perform better and last longer on countless applications, providing quality and reliability that make the G Series the premier gear pump in the industry.

Advantages include:

  • An automatic idler pin lubrication system uses the pumped fluid to continuously cool and lubricate the idler pin and bush to reduce wear in this area.
  • An internal seal cavity venting system provides a continuous flow of liquid through the seal area, ensuring cooling and reducing pressure. This reduces seal face
  • load, increasing seal life.
  • A deep “end-feed” area offers superior priming performance under low inlet pressure conditions and/or high viscosity liquids.
  • Easy to service
  • Viscosities to 440,000 cSt
  • Pressures to 20.7 bar (300 psi)
  • Flows to 2200 litres per minute
  • Handle a variety of liquids , including highly viscous, high temperature and abrasive fluids
  • Widest range of sealing options in the industry
  • High strength gear material eliminates the need for special steel fittings traditionally needed for viscous applications.
  • Widest range of housing ports
  • Widest range of bushing materials

Ask Our Team

Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.

They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the peristaltic pump.

Advantages include:

  • Handle a range of fluids including viscous products, abrasives and chemicals
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Accurate metering as well as high flows (to 180m3/hour)
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Ragazzini Peristaltic Pump are at the cutting edge of  “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:

  • Handle a range of applications  including food products, abrasives, chemicals and solids
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials  to handle food, pharmaceuticals, abrasive and/or corrosive fluids

Ask Our Team

The Gorman-Rupp 10 Series grey water pump range of self priming centrifugal pumps and effluent pumps have been delivering excellent service to industry since 1946. With large inspection cover to access pump internals for service or blockage removal and a very thick vaned solids handling impeller, 10 Series pumps are the choice for many an abattoir, concrete batch plant or chemical plant.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Capital cost savings over wet well/ dry well constructions
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Improved maintenance features to greatly reduce maintenance time and costs
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Ask Our Team

The Gorman-Rupp Roto-Prime range of self priming centrifugal pumps is specifically designed for pumping petroleum products, petrochemicals and solvents. The Roto-Prime fuel pump incorporates a variable capacity vane [priming] pump which quickly and automatically evacuates air and vapour from suction lines, making them ideal for loading, off-loading transports and stripping hoses.

Advantages include:

  • Ability to mount high and dry above the liquid source
  • Eliminates vapour lock or air lock in suction lines
  • Easy access for monitoring or service

Ask Our Team

The Gorman-Rupp Super U Series self priming dewatering and grey water pumps combines the best features of quality trash pumps in Australia with increased fuel efficiency and higher heads to pump through smaller and/or longer discharge piping systems or overcome the losses in filter systems.

These centrifugal pumps have been designed for economical, heavy duty (24/7) trouble-free operation.

Advantages include:

  • Ability to mount high and dry above the water (not in it)(to 7.6m)
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids
  • Any engine brand required by the customer
  • Choice of skid or trailer mounted configuration

Ask Our Team

The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.

Advantages include:

  • Flows to 100 l/s
  • Heads to 35m
  • Handle solids sizes to 80mm
  • Handle temperatures from -40oC to 140oC
  • Handle Viscosity to 60cSt
  • Handle 15% solids
  • A variety of mechanical seals available to suit specific applications

Ask Our Team

Ask Our Team

The EDUR LBU multiphase pump is a multi-stage centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of either C.I./ Bz/ SS, Nodular Cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction, so may be used to handle a variety of liquids.

Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).

Advantages include:

  • Liquid flows to 16 l/s
  • Gas content up to 20%
  • Cast iron/Bronze/Stainless steel, Nodular cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction
  • Completely replace the “old” DAF system with a single pump

Download the Brochure | Ask Our Team

Designing pumps since 1927, EDUR Pumpenfabrik has developed a range of pumps for use in refrigeration systems. They have been designed to provide a maximum level of safety, reliability and efficiency. They are the safe option because they use standard TEFC motors, which don’t need to be cooled using the pumped media. They are efficient because they use magnetic couplings. By using magnetic couplings energy is not wasted by pumping fluid over the motor [as with “canned motor pumps”] and back through to the separator.

Advantages include:

  • Suitable for ammonia, C02, synthetic refrigerants and refrigerants containing hydrocarbons/li>
  • No heat transfer from motor to pumped media/li>
  • Low maintenance/li>
  • Low NPSH values/li>
  • Pulsation free operation/li>
  • Long service life

Ask Our Team

The EDUR range of Industry Bloc close-coupled centrifugal pumps are ideal for pumping water and other clean and slightly polluted fluids. They are compact in size, and available in a variety of materials of construction including cast iron, bronze and stainless steel.

Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.

Advantages include:

  • All Iron, All Bronze and All Stainless Steel construction
  • Flows to 165 l/s
  • Heads to 90m
  • Handle temperatures from -40oC to 140oC depending on model
  • Handle viscosity to 115 cSt
  • Handle solids content to 15%
  • Single and double mechanical seals available
  • Surface Mounted Pump

Ask Our Team

The EDUR range of multi-stage self priming centrifugal pumps can self prime on suction lifts up to 7.5 metres, and deliver heads to 160m. These self priming pumps are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel) enabling them to pump corrosive fluids including seawater.

These Grey Water Pumps can be close or long-coupled.

Advantages include:

  • Self Priming to 7.5 metres
  • All Iron, All Bronze and All Stainless Steel construction
  • Flows to 80 l/s
  • Heads to 160m
  • Handle temperatures from -40oC to 90oC depending on model
  • Single and double mechanical seals available

Ask Our Team

The EDUR range of Stainless Bloc close-coupled centrifugal pumps are ideal for transporting corrosive fluids. Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.

Advantages include:

  • Full stainless steel construction
  • Flows to 60 l/s
  • Heads to 90m
  • Handle temperatures from -20oC to 110oC depending on model
  • Handle viscosity to 115 cSt
  • Handle solids content to 15%
  • Handle solids to 40mm depending on the model of centrifugal pump
  • Single and double mechanical seals available

Ask Our Team

The EDUR range of Multistage Liquid Gas (LPG) pumps can deliver flows to 45 l/s and pressures to 14 bar (to go to 90 l/s and 40 bar in the not too distant future). These technically superior pumps deliver high efficiencies, low noise levels, low NPSH and reduced axial and radial forces. They also offer less wear than sliding vane pumps and higher efficiencies than side channel pumps. Pumps are ideal for transfer systems and for loading and unloading ships, rail cars, trucks etc.

Motors are 2 pole with IP55 enclosures, and insulation class F and conform to ATEX 94/9/EC. Advantages include:

Advantages include:

  • Nodular Cast Iron or All Stainless Steel construction
  • Able to handle liquid-gas mixtures (outgassing)
  • Flows to 45 l/s (soon to double)
  • Heads to 23 bar (soon to go to 40 bar)
  • Handle temperatures from -40oC to 110oC depending on model
  • Balanced Single and double mechanical seals available as well as magnetic coupling

Motor options include:

  • ATEX 112G EExe llT3
  • ATEX 112G EExde llCT4

Certificates and Reports include:

  • Declaration of conformity according 94/9/EC (ATEX)
  • Gost-R Certification
  • Test Certificate DIN EN 10204 – 2.2
  • Acceptance Test Certificate DIN EN 10204 – 3.1

Ask Our Team

Ask Our Team

The EDUR range of multi-stage centrifugal pumps can deliver flows to 45 litres per second and heads to 300 metres. They are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel and Super-Duplex) enabling them to pump corrosive fluids including seawater. These centrifugal pumps are ideal for booster systems, boiler feed and condensate systems, washing plants, water treatment and hardening systems.

Pumps can be close or long-coupled. Advantages include:

  • All Iron, All Bronze, All Stainless Steel and Super-Duplex construction
  • Flows to 45 l/s
  • Heads to 300m
  • Handle temperatures from -40oC to 160oC depending on model
  • Single and double mechanical seals available along with gland packing and water cooled gland packing

Ask Our Team

The EDUR PBU multiphase pump is a single-stage peripheral centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of stainless steel, so may be used to handle a variety of liquids. Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).

Advantages include:

  • Liquid flows to 1 l/s
  • Gas content up to 15%
  • Stainless steel construction
  • Completely replace the “old” DAF system with a single pump

Download the Brochure | Ask Our Team

The Echo-Storm aerator features a classic design for modern applications. Whether you need a complete replacement or simply an enhancement to your existing system, the Venturi Aerator offers an innovative and convenient approach to your water aeration needs.

Applications include:

  • Odour Control
  • Sludge Digestion
  • Wastewater Aeration
  • Lake Destratification
  • Septage treatment and many others

These aeration units are used in conjunction with Gorman-Rupp self-priming centrifugal pumps to deliver solutions with the following advantages:

  • Simple, uncomplicated design
  • Easy to install
  • High SOTR [Standard Oxygen Transfer rate]
  • Easy to maintain
  • Low cost of ownership
  • Safe for operators

Ask Our Team

The HO3/4A4-36DK Gorman-Rupp Pump is a high quality cast iron hand oscillating drum pump designed for the transfer of and dispensing of lubricating oils and other non-corrosive liquids which are compatible with pump component materials.

Advantages include:

  • Suction lift up to 4.5 metres
  • Accurate measurement of fluids being pumped (0.38 litres per stroke)
  • 23 litres per minute capacity (at 60 strokes per minute)
  • Supplied with 1200mm of suction tube with 2” (50mm) bung adaptor
  • Maximum pressure of 50 psi
  • Maximum temperature of 48oC
  • Buna-N Seal, Bronze Valves, Fibre Gaskets
  • 19mm suction and discharge tube

Download the Brochure | Ask Our Team

The RamParts P Series range of single acting air driven diaphragm sludge pumps and slurry pumps take over where other pumps in Australia fail.

In applications where progressive cavity pumps or lobe pumps wear prematurely or double diaphragm pumps struggle, RamParts extra heavy duty sludge pumps step up.

Advantages include:

  • Advanced DRC (separate) Controllers
  • Self priming to 6 metres
  • Handle slurries to 70% solids by volume
  • Superior solids handling design
  • Run Dry indefinitely
  • Dead-head without damage
  • Re-build pumps for 15% of their purchase price (not 80% like some PD pumps)
  • Improved maintenance features to greatly reduce maintenance time and costs
  • A variety of materials of construction to handle abrasive and/or corrosive fluids, including a variety of diaphragm materials and sludge pump linings
  • Automatic filter press feed control options
  • Flows to 1200 litres per minute with models from 1½” through to 6”
  • Heads to 65m

Our Team is available to answer your pump query within the hour

Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.

Email

or Call

(02) 9898 1800

Monday – Friday
9am – 5pm
Australia Wide

Gorman Rupp Pumps LogoHydro Innovations is proud to be the sole distributor of Gorman-Rupp pumps in Australia.

Gorman-Rupp is one of the world’s leading manufacturers of self-priming sewage pumps and wastewater pumping equipment, and has been for more than 75 years. They offer a diverse range of high performance, high-quality, reliable pumps and pumping systems required for lasting service in wastewater pumps, sewage pumps, industrial waste, petroleum, fire and OEM markets. Learn more about Gorman-Rupp and our other partners »

News from Chemical Industry Leaders