Mount Piper Power Station
Gorman-Rupp Pump solution makes Power Station safe for operators
The asset owner at the Mount Piper Power Station (Mr. Rainer Scheurer) was looking for a solution to the maintenance issues associated with his submersible sewage pump stations on the site. The problems were many and varied, including lifting chains breaking, sewage pumps becoming stuck on their guide rails, as well as general reliability issues. Even with everything going well, operators would be exposed to a 7m fall into the pit whilst hoisting submersible pumps to the surface for maintenance.
Mr Scheurer came to Hydro Innovations for some ideas on how he could get away from these issues. Hydro Innovations suggested the use of Gorman-Rupp self-priming sewage pumps, which would mean that only one operator would be needed for most of the maintenance issues, and any work could be done without opening wet well covers. Rainer liked the idea, but the pit was so deep, that self priming pumps could not be located at ground level.
The operators were happy with the pumps and how easily they can now be accessed for monitoring and maintenance
Hydro Innovations suggested putting the sewage pumps into the existing valve vault (to get pumps closer to water level), re-using the path the old discharge lines took, and connecting directly into the existing rising main in the valve vault.
Gorman-Rupp’s V3B60-B pumps were chosen for the job, to deliver the 15 litres per second flow rate, but most importantly, were capable of re-priming the required 7.6 metre suction lift – a tough ask for most self priming pumps. Hydro Innovations explained that most self priming pumps with a full casing of liquid are capable of priming to this level, but re-priming automatically, with only a partially filled casing (because casing siphoning can occur between pump cycles) is a totally different proposition. As Gorman-Rupp publish guaranteed re-prime lifts on their sewage pump curves, Hydro Innovations had no hesitation applying the sewage pump on this suction lift.
Hydro Innovations were duly given the go-ahead on the sewerage pump station project and set to work designing a piping and valve system that could comfortably fit in the valve vault. A compact but practical design was approved and the project delivered.
Mount Piper Power Station now has a sewage pump station that is under cover (inside the valve vault), is easily accessed without the need for lifting apparatus, and can be safely maintained by one operator.
To find out more about pumps in Australia, call us on (02) 9898 1800 or email us at firstname.lastname@example.org.
The Gorman-Rupp Super T Series self priming centrifugal wastewater/sewage pump has been the world benchmark for this technology since 1963 (over 50 years!). They have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal.
Our Team is available to answer your pump query within the hour
Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.
(02) 9898 1800
Monday – Friday
9am – 5pm
Hydro Innovations is proud to be the sole distributor of Gorman-Rupp pumps in Australia.
Gorman-Rupp is one of the world’s leading manufacturers of self-priming sewage pumps and wastewater pumping equipment, and has been for more than 75 years. They offer a diverse range of high performance, high-quality, reliable pumps and pumping systems required for lasting service in wastewater pumps, sewage pumps, industrial waste, petroleum, fire and OEM markets. Learn more about Gorman-Rupp and our other partners »