• Showing all 11 results

  • Filter

Download the Brochure | Ask Our Team

Ragazzini Peristaltic Pump are at the cutting edge of “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product.

Further advantages include:

  • Pump wine, must, grapes, grape bunches, or red fermented
  • The most gentle pumping action available
  • No crushing of stems, berries or seeds
  • Run dry without damage
  • No seals or valves to clog or fail/replace
  • Only one part [the hose] comes in contact with the pumped media
  • No [expensive] messy fluid lubricant in the casing
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers on some models
  • A variety of hose materials to handle food, pharmaceuticals, abrasive and/or corrosive fluids
  • Can be reversed and run in either direction
  • Optional Touch Screen shows flow, speed, diagnostics, alarm history, etc.
  • Optional Flow Meter allows

Download the Brochure | Ask Our Team

Ragazzini Peristaltic Pump are at the cutting edge of “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product.

Further advantages include:

  • Handle a range of applications, including food products, abrasives, chemicals, sludge, and solids
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Run dry without damage
  • No seals or valves to clog or fail/replace
  • Only one part [the hose] comes in contact with the pumped media.
  • No [expensive] messy fluid lubricant in the casing
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials to handle food, pharmaceuticals, abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.
They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the pumped media.

Advantages include:

  • Handle a range of fluids including viscous products, abrasives, and chemicals
  • High performance including pressures to 158 BAR, reversible flow, and suction lifts
  • Accurate metering as well as high flows (to 180m3/hour)
  • Can run dry without damage
  • Reverse flow by reversing motor
  • Self-priming to 9 metres
  • No seals or valves to clog, fail, or replace
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers available on some models
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive, and/or corrosive fluids [See brochure]

Download the Brochure | Ask Our Team

The Gorman-Rupp G Series range of self priming positive displacement rotary gear pumps is designed to provide superior performance in the transfer of process fluids, unmatched in the industry. Available in Medium-Duty , Heavy-Duty and Extreme-Duty (abrasive service) models, pump materials include cast iron, cast steel and stainless steel.

G Series self priming pumps are manufactured with unique features that enable them to perform better and last longer on countless applications, providing quality and reliability that make the G Series the premier pump in the industry.

Advantages include:

  • An automatic idler pin lubrication system uses the pumped fluid to continuously cool and lubricate the idler pin and bush to reduce wear in this area.
  • An internal seal cavity venting system provides a continuous flow of liquid through the seal area, ensuring cooling and reducing pressure. This reduces seal face
  • load, increasing seal life.
  • A deep “end-feed” area offers superior priming performance under low inlet pressure conditions and/or high viscosity liquids.
  • Easy to service
  • Viscosities to 440,000 cSt
  • Pressures to 20.7 bar (300 psi)
  • Flows to 2200 litres per minute
  • Handle a variety of liquids , including highly viscous, high temperature and abrasive fluids
  • Widest range of sealing options in the industry
  • High strength material eliminates the need for special steel fittings traditionally needed for viscous applications.
  • Widest range of housing ports
  • Widest range of bushing materials

Download the Brochure | Ask Our Team

The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.

Advantages include:

  • Flows to 108 l/s
  • Heads to 55m
  • Handle solids sizes to 80mm
  • Handle temperatures from -50 °C to 180 °C
  • Handle Viscosity to 60cSt
  • Handle solids
  • A variety of mechanical seals available to suit specific applications

Ask Our Team

Ask Our Team

Gorman-Rupp 10 Series pumps are suitable for a range of solids handling duties, including wastewater, effluent and blood at animal process plants to re-use water at concrete batch plants. They have been delivering excellent service to industry since 1946, with their large removable cover-plate and thick vaned impellers being popular with operators. They are also available in materials of construction [SS316 or CD4MCuN], making them suitable for brine or chemical pumping applications.

10 Series Pump Advantages:

  • Ability to mount high and dry above the wet well [not in it]
  • Capital cost savings over wet well/ dry well constructions
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service

Download the Brochure | Ask Our Team

EDUR self-priming centrifugal pumps can operate on suction lifts to 7.5 metres and can deliver pressures to 165m. They are able to transfer mildly contaminated water, cooling water, emulsions, oils, and fuels such as kerosine, petrol and diesel.

EDUR self-priming pumps use an integrated jet pump to provide a fast priming function, and they can be supplied as close or long-coupled configurations.

These self-priming pumps are available in Cast Iron, All Bronze, or All Stainless Steel [depending on model] enabling them to pump corrosive fluids including seawater.

Advantages include:

  • Self Priming to 7.5 metres
  • All Iron, All Bronze and All Stainless Steel construction
  • Flows to 83 l/s
  • Heads to 165m
  • Low NPSH values
  • High efficiencies for reduced power consumption
  • Axial thrust-free, open or load-relieved closed impellers
  • Handle temperatures from -40 °C to 90 °C
  • Viscosity up to 115 cSt
  • Single and double mechanical seals available

Download the Brochure | Ask Our Team

The EDUR range of Industry Bloc close-coupled centrifugal pumps are ideal for pumping water and other clean and slightly polluted fluids. They are compact in size, and available in a variety of materials of construction including cast iron, bronze and stainless steel.

Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.

Advantages include:

  • Flows to 166 l/s
  • Heads to 98m
  • Handle temperatures from -50 °C to 140 °C
  • Handle viscosity to 200 cSt
  • Handle solids content

Download the Brochure | Ask Our Team

Discover the exceptional Torque Flow pumps by EDUR, boasting a compact design that resists cavitation with unparalleled efficiency. Experience seamless fluid transport, even when dealing with substances laden with solids.

Advantages include:

  • Full stainless steel construction
  • Flows to 27 l/s
  • Head max. 61 m
  • Handle temperatures from -25 °C to 110 °C
  • Handle viscosity to 60 cSt
  • Handle solids content
  • Handle solids to 40mm depending on the model of centrifugal pump
  • Single and double mechanical seals available

Download the Brochure | Ask Our Team

The RamParts P Series range of single acting air driven diaphragm sludge pumps and slurry pumps take over where other pumps in Australia fail.

In applications where progressive cavity pumps or lobe pumps wear prematurely or double diaphragm pumps struggle, RamParts extra heavy duty sludge pumps step up.

Advantages include:

  • Advanced DRC (separate) Controllers
  • Self priming to 6 metres
  • Handle slurries to 70% solids by volume
  • Superior solids handling design
  • Run Dry indefinitely
  • Dead-head without damage
  • Re-build pumps for 15% of their purchase price (not 80% like some PD pumps)
  • Improved maintenance features to greatly reduce maintenance time and costs
  • A variety of materials of construction to handle abrasive and/or corrosive fluids, including a variety of diaphragm materials and sludge pump linings
  • Automatic filter press feed control options
  • Flows to 1200 litres per minute with models from 1½” through to 6”
  • Heads to 65m

Download the Brochure | Ask Our Team

Discover the exceptional Torque Flow pumps by EDUR, boasting a compact design that resists cavitation with unparalleled efficiency. Experience seamless fluid transport, even when dealing with substances laden with solids.

Advantages include:

  • Full stainless steel construction
  • Flows to 66 l/s
  • Head max. 98 m
  • Handle temperatures from -25 °C to 110 °C
  • Handle viscosity to 115 cSt
  • Stainless steel material