• Showing all 20 results

  • Filter

Download the Brochure | Ask Our Team

The Gorman-Rupp Super T Series pump with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult-to-pump, solids in suspension (such as wet wipes, rags and feathers).

They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Super T Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.

Introducing the Eradicator Plus, meticulously crafted for unparalleled performance in the most demanding scenarios, including handling liquids laden with debris like trash bags, wipes, mop heads, hair, industrial by-products, and agricultural wastes. Specifically engineered for cutting and tearing organic solids that enter the pump, the Eradicator Plus stands out as the ultimate solution.

This powerhouse is equipped with a seamlessly removable lightweight inspection cover, an extra-thick G-R Hard Iron wearplate, enhanced stainless steel components, and a robust load-bearing shaft. Among the Super T Series product lineup, the Eradicator Plus models emerge as the epitome of aggressiveness, ensuring superior efficiency in extreme-duty applications.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Super T Series pumps now have several variants that either improve solids handling or efficiency.The Gorman-Rupp Super T Series self-priming centrifugal wastewater/sewage pump has been the world benchmark for this technology since 1963 (>50 years). They have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal.

Advantages include:

  • Self-Priming pump has the ability to mount high and dry above the wet well (not in it)
  • Low cost of ownership
  • Greatly reduced OH&S issues – no more working over water/heights/cranes/heavy swinging weights
  • Surface-mounted pumps with easy access for monitoring or service
  • Advanced safety features including pressure relief valve to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

The Gorman-Rupp Super T Series pump with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult-to-pump, solids in suspension (such as wet wipes, rags and feathers).

They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Super T Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

The Gorman-Rupp Ultra V Series solids handling sewage and wastewater pumps with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult to pump, solids in suspension (such as “wet wipes” , rags and feathers).

They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Ultra V Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Ragazzini Peristaltic Pump are at the cutting edge of  “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:

  • Handle a range of applications  including food products, abrasives, chemicals and solids
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials  to handle food, pharmaceuticals, abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.

They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the peristaltic pump.

Advantages include:

  • Handle a range of fluids including viscous products, abrasives and chemicals
  • High performance including pressures to 15 BAR, reversible flow, and suction lifts
  • Accurate metering as well as high flows (to 180m3/hour)
  • Easy maintenance including easy hose replacement and easy leak detection
  • CIP with retractable rollers
  • Greater operator safety
  • Easy access for monitoring or service
  • A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

The Gorman-Rupp Super U Series self priming dewatering and grey water pumps combines the best features of quality trash pumps in Australia with increased fuel efficiency and higher heads to pump through smaller and/or longer discharge piping systems or overcome the losses in filter systems.

These centrifugal pumps have been designed for economical, heavy duty (24/7) trouble-free operation.

Advantages include:

  • Ability to mount high and dry above the water (not in it)(to 7.6m)
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
  • A variety of materials of construction to handle abrasive and/or corrosive fluids
  • Any engine brand required by the customer
  • Choice of skid or trailer mounted configuration

Ask Our Team

The Gorman-Rupp G Series range of self priming positive displacement rotary gear pumps is designed to provide superior performance in the transfer of process fluids, unmatched in the industry. Available in Medium-Duty , Heavy-Duty and Extreme-Duty (abrasive service) models, pump materials include cast iron, cast steel and stainless steel.

G Series self priming pumps are manufactured with unique features that enable them to perform better and last longer on countless applications, providing quality and reliability that make the G Series the premier pump in the industry.

Advantages include:

  • An automatic idler pin lubrication system uses the pumped fluid to continuously cool and lubricate the idler pin and bush to reduce wear in this area.
  • An internal seal cavity venting system provides a continuous flow of liquid through the seal area, ensuring cooling and reducing pressure. This reduces seal face
  • load, increasing seal life.
  • A deep “end-feed” area offers superior priming performance under low inlet pressure conditions and/or high viscosity liquids.
  • Easy to service
  • Viscosities to 440,000 cSt
  • Pressures to 20.7 bar (300 psi)
  • Flows to 2200 litres per minute
  • Handle a variety of liquids , including highly viscous, high temperature and abrasive fluids
  • Widest range of sealing options in the industry
  • High strength material eliminates the need for special steel fittings traditionally needed for viscous applications.
  • Widest range of housing ports
  • Widest range of bushing materials

Download the Brochure | Ask Our Team

The EDUR PBU multiphase pump is a single-stage peripheral centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of stainless steel, so may be used to handle a variety of liquids. Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).

Advantages include:

  • Flows to  401 l/s
  • Head max 145m
  • Operating pressure max. 16 bar
  • Temperature -40 °C to 140 °C
  • Gas contents up to 15%
  • Viscosity up to 115 cSt
  • Stainless steel construction
  • Completely replace the “old” DAF system with a single pump

Download the BrochureAsk Our Team

The EDUR LBU multiphase pump is a multi-stage centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of either C.I./ Bz/ SS, Nodular Cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction, so may be used to handle a variety of liquids.

Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).

Advantages include:

  • Flows to  16 l/s
  • Heads to max. 250 m
  • Operating pressure max. 40 bar
  • Handle temperatures from -50 °C to 140 °C
  • Gas contents up to 30 %
  • up to 115  cSt
  • Cast iron/Bronze/Stainless steel, Nodular cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction
  • Completely replace the “old” DAF system with a single pump

Download the Brochure | Ask Our Team

The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.

Advantages include:

  • Flows to 108 l/s
  • Heads to 55m
  • Handle solids sizes to 80mm
  • Handle temperatures from -50 °C to 180 °C
  • Handle Viscosity to 60cSt
  • Handle solids
  • A variety of mechanical seals available to suit specific applications

Ask Our Team

Ask Our Team

The Gorman-Rupp 10 Series grey water pump range of self priming centrifugal pumps and effluent pumps have been delivering excellent service to industry since 1946. With large inspection cover to access pump internals for service or blockage removal and a very thick vaned solids handling impeller, the 10 Series grey water pump are the choice for many such as abattoir, concrete batch plant or chemical plant.

10 Series Grey water pump advantages:

  • Ability to mount high and dry above the wet well [not in it]
  • Capital cost savings over wet well/ dry well constructions
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Improved maintenance features to greatly reduce maintenance time and costs
  • A variety of materials of construction to handle abrasive and/or corrosive fluids

Download the Brochure | Ask Our Team

Designing pumps since 1927, EDUR Pumpenfabrik has developed a range of pumps for use in refrigeration systems. They have been designed to provide a maximum level of safety, reliability and efficiency. They are the safe option because they use standard TEFC motors, which don’t need to be cooled using the pumped media. They are efficient because they use magnetic couplings. By using magnetic couplings energy is not wasted by pumping fluid over the motor [as with “canned motor pumps”] and back through to the separator.

Advantages include:

  • Flows to 18 l/s
  • Heads to 300m
  • Operating pressure max 40 bar
  • Handle temperatures from -50 °C to 220 °C
  • Handle Viscosity to 115 cSt

Ask Our Team

Discover the unparalleled versatility of EDUR self-priming centrifugal pumps, engineered to excel with mildly contaminated and gas-emitting fluids. Their innovative design empowers them to effortlessly draw in and seamlessly distribute liquids from lower elevations, making them the ideal choice for a wide range of applications.
These self priming pumps are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel) enabling them to pump corrosive fluids including seawater.

Advantages include:

  • Self Priming to 7.5 metres
  • All Iron, All Bronze and All Stainless Steel construction
  • Flows to 83 l/s
  • Heads to 165m
  • Handle temperatures from -40 °C to 110 °C
  • Viscosity up to 115 cSt
  • Single and double mechanical seals available

Download the Brochure | Ask Our Team

The EDUR range of Industry Bloc close-coupled centrifugal pumps are ideal for pumping water and other clean and slightly polluted fluids. They are compact in size, and available in a variety of materials of construction including cast iron, bronze and stainless steel.

Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.

Advantages include:

  • Flows to 166 l/s
  • Heads to 98m
  • Handle temperatures from -50 °C to 140 °C
  • Handle viscosity to 200 cSt
  • Handle solids content

Download the Brochure | Ask Our Team

The EDUR range of multi-stage centrifugal pumps can deliver flows to 45 litres per second and heads to 300 metres. They are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel and Super-Duplex) enabling them to pump corrosive fluids including seawater. These centrifugal pumps are ideal for booster systems, boiler feed and condensate systems, washing plants, water treatment and hardening systems.

Pumps can be close or long-coupled. Advantages include:

  • All Iron, All Bronze, All Stainless Steel and Super-Duplex construction
  • Flows to 16 l/s
  • Head: max. 300 m
  • Discharge pressure: max. 21,4 bar
  • Operating pressure: max. 40 bar
  • Handle temperatures -50 °C to 160 °C
  • Viscosity: The NH series are able to handle media with a viscosity up to 200 cSt, while the other series of multistage centrifugal pumps can handle viscosities up to 115 cSt
  • Single and double mechanical seals available along with gland packing and water cooled gland packing

Download the Brochure | Ask Our Team

Discover the exceptional Torque Flow pumps by EDUR, boasting a compact design that resists cavitation with unparalleled efficiency. Experience seamless fluid transport, even when dealing with substances laden with solids.

Advantages include:

  • Full stainless steel construction
  • Flows to 27 l/s
  • Head max. 61 m
  • Handle temperatures from -25 °C to 110 °C
  • Handle viscosity to 60 cSt
  • Handle solids content
  • Handle solids to 40mm depending on the model of centrifugal pump
  • Single and double mechanical seals available

Download the Brochure | Ask Our Team

The JS Lamella pump from JS Poputec is used for transporting solid materials such as pre-broken bone and offal at abattoirs and other meat processing plants.

The bone and offal pump is used instead of more conventional methods such as screw conveyors, compressed air “blow-tank” systems and manual systems (bins and fork lifts).

Advantages include:

  • Keeping the product in an enclosed pipeline system (compared to a screw conveyor or manual system) reduces the chances of contamination.
  • Reduced labour costs to operate (compared to a blow tank or manual system).
  • Less maintenance than a screw conveyor or alternative pump system.

The JS Lamella system can deliver product effectively, cleanly, and minimise costs.

Download the Brochure | Ask Our Team

The RamParts P Series range of single acting air driven diaphragm sludge pumps and slurry pumps take over where other pumps in Australia fail.

In applications where progressive cavity pumps or lobe pumps wear prematurely or double diaphragm pumps struggle, RamParts extra heavy duty sludge pumps step up.

Advantages include:

  • Advanced DRC (separate) Controllers
  • Self priming to 6 metres
  • Handle slurries to 70% solids by volume
  • Superior solids handling design
  • Run Dry indefinitely
  • Dead-head without damage
  • Re-build pumps for 15% of their purchase price (not 80% like some PD pumps)
  • Improved maintenance features to greatly reduce maintenance time and costs
  • A variety of materials of construction to handle abrasive and/or corrosive fluids, including a variety of diaphragm materials and sludge pump linings
  • Automatic filter press feed control options
  • Flows to 1200 litres per minute with models from 1½” through to 6”
  • Heads to 65m

Download the Brochure | Ask Our Team

Discover the exceptional Torque Flow pumps by EDUR, boasting a compact design that resists cavitation with unparalleled efficiency. Experience seamless fluid transport, even when dealing with substances laden with solids.

Advantages include:

  • Full stainless steel construction
  • Flows to 66 l/s
  • Head max. 98 m
  • Handle temperatures from -25 °C to 110 °C
  • Handle viscosity to 115 cSt
  • Stainless steel material