Download the Brochure | Ask Our Team
The Ultra V Series is Gorman-Rupp’s higher pressure self-priming dewatering pump. These engine driven pumps are direct coupled to diesel engines through flexible flywheel couplings to ensure perfect alignment between pump and engine. These are mounted onto our “engitank” platform. This platform includes an extra heavy duty fuel tank base with a 450 litre capacity, lifting points on 4 corners, fork lift pockets, and a central lifting frame. A sheet-metal roof is provided to help protect the engine from the elements.
Advantages include:
- Higher pressures
- Simple priming system. Just fill casing with water
- No complicated “add-on” priming systems
- Pump solid particles up to 76mm dia
- Pump stringy materials [rags, bags and wipes] with Eradicator technology
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with externally adjustable clearances.
- A variety of materials of construction to handle abrasive and/or corrosive fluids
- Any engine brand required by the customer.
- Choice of skid or trailer mounted configuration
Download the Brochure | Ask Our Team
The Gorman-Rupp Super T Series self-priming dewatering pump has been the world benchmark for this technology since 1963 (>55 years). These engine driven pumps are direct coupled to diesel engines through flexible flywheel couplings to ensure perfect alignment between pump and engine. These are mounted onto our “engitank” platform. This platform includes an extra heavy duty fuel tank base with a 450 litre capacity, lifting points on 4 corners, fork lift pockets, and a central lifting frame. A sheet-metal roof is provided to help protect the engine from the elements.
Advantages include:
- Simple priming system. Just fill casing with water.
- No complicated “add-on” priming systems.
- Pump solid particles up to 76mm dia
- Pump stringy materials [rags, bags and wipes] with Eradicator technology
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with externally adjustable clearances.
- A variety of materials of construction to handle abrasive and/or corrosive fluids
- Any engine brand required by the customer.
- Choice of skid or trailer mounted configuration
Download the Brochure | Ask Our Team
The Gorman-Rupp Super T Series self-priming centrifugal wastewater/sewage pump has been the world benchmark for this technology since 1963 (>50 years). They have been designed for economical, trouble-free operation, with superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal.
Advantages include:
- Self-Priming pump has the ability to mount high and dry above the wet well (not in it)
- Low cost of ownership
- Greatly reduced OH&S issues – no more working over water/heights/cranes/heavy swinging weights
- Surface-mounted pumps with easy access for monitoring or service
- Advanced safety features including pressure relief valve to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Super T Series pump with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult-to-pump, solids in suspension (such as wet wipes, rags and feathers).
They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Super T Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Ultra V Series is the most advanced self-priming centrifugal wastewater and sewage pump range on the market today.
They are high performance, high head, and high-efficiency pumps, designed to deliver a long and low maintenance service life, with a low cost of ownership.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Efficiencies up to 20% higher than any other solids handling self primer
- Higher pressures (heads) (up to 300%) than any other solids handling self primer
- Greatly improved operator safety
- Easy access for monitoring or service
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Ultra V Series solids handling sewage and wastewater pumps with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult to pump, solids in suspension (such as “wet wipes” , rags and feathers).
They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Ultra V Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
Ragazzini Peristaltic Pump are at the cutting edge of “Hose Pump” design and have the features to make pumping easier. They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the product. Further advantages include:
- Handle a range of applications including food products, abrasives, chemicals and solids
- High performance including pressures to 15 BAR, reversible flow, and suction lifts
- Easy maintenance including easy hose replacement and easy leak detection
- CIP with retractable rollers
- Greater operator safety
- Easy access for monitoring or service
- A variety of hose materials to handle food, pharmaceuticals, abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
Ragazzini Rotho Peristaltic Pumps are the ideal choice for dosing and metering.
They consist of an elastomeric tube that is squeezed along its length by rollers that push the fluid contained within. This creates a gentle pumping action that doesn’t cause damage to the peristaltic pump.
Advantages include:
- Handle a range of fluids including viscous products, abrasives and chemicals
- High performance including pressures to 15 BAR, reversible flow, and suction lifts
- Accurate metering as well as high flows (to 180m3/hour)
- Easy maintenance including easy hose replacement and easy leak detection
- CIP with retractable rollers
- Greater operator safety
- Easy access for monitoring or service
- A variety of hose materials to handle food, pharmaceuticals, chemical, abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
The Gorman-Rupp Super U Series self priming dewatering and grey water pumps combines the best features of quality trash pumps in Australia with increased fuel efficiency and higher heads to pump through smaller and/or longer discharge piping systems or overcome the losses in filter systems.
These centrifugal pumps have been designed for economical, heavy duty (24/7) trouble-free operation.
Advantages include:
- Ability to mount high and dry above the water (not in it)(to 7.6m)
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Advanced safety features to protect operators
- Improved maintenance features to greatly reduce maintenance time and costs, with removable rotating assembly
- A variety of materials of construction to handle abrasive and/or corrosive fluids
- Any engine brand required by the customer
- Choice of skid or trailer mounted configuration
Ask Our Team
The Gorman-Rupp G Series range of self priming positive displacement rotary gear pumps is designed to provide superior performance in the transfer of process fluids, unmatched in the industry. Available in Medium-Duty , Heavy-Duty and Extreme-Duty (abrasive service) models, pump materials include cast iron, cast steel and stainless steel.
G Series self priming pumps are manufactured with unique features that enable them to perform better and last longer on countless applications, providing quality and reliability that make the G Series the premier pump in the industry.
Advantages include:
- An automatic idler pin lubrication system uses the pumped fluid to continuously cool and lubricate the idler pin and bush to reduce wear in this area.
- An internal seal cavity venting system provides a continuous flow of liquid through the seal area, ensuring cooling and reducing pressure. This reduces seal face
- load, increasing seal life.
- A deep “end-feed” area offers superior priming performance under low inlet pressure conditions and/or high viscosity liquids.
- Easy to service
- Viscosities to 440,000 cSt
- Pressures to 20.7 bar (300 psi)
- Flows to 2200 litres per minute
- Handle a variety of liquids , including highly viscous, high temperature and abrasive fluids
- Widest range of sealing options in the industry
- High strength material eliminates the need for special steel fittings traditionally needed for viscous applications.
- Widest range of housing ports
- Widest range of bushing materials
Download the Brochure | Ask Our Team
The EDUR PBU multiphase pump is a single-stage peripheral centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of stainless steel, so may be used to handle a variety of liquids. Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).
Advantages include:
- Liquid flows to 1 l/s
- Gas content up to 15%
- Stainless steel construction
- Completely replace the “old” DAF system with a single pump
Download the Brochure | Ask Our Team
The EDUR LBU multiphase pump is a multi-stage centrifugal pump with the unique capability of being able to pump a liquid/gas mixture. The centrifugal pump is constructed of either C.I./ Bz/ SS, Nodular Cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction, so may be used to handle a variety of liquids.
Air, Oxygen, Carbon Dioxide and Ozone gases can be introduced into the suction line and transported and used to mix or disperse the gases. This makes the pump ideal for DAF plants, where the multiphase pumps provide the task of air saturation without the use of compressed air (no compressor, air saturation tank or associated controls).
Advantages include:
- Liquid flows to 16 l/s
- Gas content up to 20%
- Cast iron/Bronze/Stainless steel, Nodular cast Iron, All-Bronze, Stainless Steel, or Super-Duplex Stainless Steel construction
- Completely replace the “old” DAF system with a single pump
Download the Brochure | Ask Our Team
The Lampo emergency response trailer unit is designed to speed up and simplify the deployment of emergency response equipment for municipalities, emergency services and contractors.
Advantages include:
- Enables deployment of multiple pieces of equipment, using only one vehicle.
- Diesel-driven power generator complete with variable frequency drive [VFD] powers a lighting tower and a rugged and reliable Gorman-Rupp pump.
- The cleverly designed unit can light up a work area while operators set up the self-priming pump or operate numerous electric tools from the power generator.
- The VFD allows for soft starting electrical equipment, including the pump, and can vary the speeds of these machines to suit the duty at hand. While all this is happening, the compressor can be driving air nibblers, air-operated nail guns, wrenches or tyre inflators.
- The Lampo units also come standard with an air compressor, discharge hose reel, suction hoses and a robust mounted toolbox.
The central components of the Lampo – the generator, VFD and lighting system are manufactured by quality equipment manufacturer, Euromacchine in Italy. They are housed in an acoustically rated enclosure constructed from powder-coated galvanised steel plates.
The Lampo emergency response unit are then mounted on an Australian heavy-duty built hot-dip galvanised double axle trailer and fitted with a self-priming Gorman-Rupp trash pump.
Ask Our Team
The EDUR Torque-Flow (FUB) range of centrifugal pumps have vortex impellers and are capable of handling spherical solids up to 80mm in diameter. They are close-coupled and available with casings of Cast Iron, Ductile Iron or Gunmetal Bronze, impellers of Ductile Iron, Gunmetal Bronze or Stainless Steel, with Stainless Steel shafts (in 2 grades). Some models are available in all Stainless Steel construction. Abrasion-resistant protective linings of ceramic and polyurethane are also available.
Advantages include:
- Flows to 100 l/s
- Heads to 35m
- Handle solids sizes to 80mm
- Handle temperatures from -40oC to 140oC
- Handle Viscosity to 60cSt
- Handle 15% solids
- A variety of mechanical seals available to suit specific applications
Ask Our Team
The Gorman-Rupp 10 Series grey water pump range of self priming centrifugal pumps and effluent pumps have been delivering excellent service to industry since 1946. With large inspection cover to access pump internals for service or blockage removal and a very thick vaned solids handling impeller, the 10 Series grey water pump are the choice for many such as abattoir, concrete batch plant or chemical plant.
10 Series Grey water pump advantages:
- Ability to mount high and dry above the wet well [not in it]
- Capital cost savings over wet well/ dry well constructions
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Improved maintenance features to greatly reduce maintenance time and costs
- A variety of materials of construction to handle abrasive and/or corrosive fluids
Download the Brochure | Ask Our Team
Designing pumps since 1927, EDUR Pumpenfabrik has developed a range of pumps for use in refrigeration systems. They have been designed to provide a maximum level of safety, reliability and efficiency. They are the safe option because they use standard TEFC motors, which don’t need to be cooled using the pumped media. They are efficient because they use magnetic couplings. By using magnetic couplings energy is not wasted by pumping fluid over the motor [as with “canned motor pumps”] and back through to the separator.
Advantages include:
- Suitable for ammonia, C02, synthetic refrigerants and refrigerants containing hydrocarbons/li>
- No heat transfer from motor to pumped media/li>
- Low maintenance/li>
- Low NPSH values/li>
- Pulsation free operation/li>
- Long service life
Ask Our Team
The EDUR range of multi-stage self priming centrifugal pumps can self prime on suction lifts up to 7.5 metres, and deliver heads to 160m. These self priming pumps are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel) enabling them to pump corrosive fluids including seawater.
These Grey Water Pumps can be close or long-coupled.
Advantages include:
- Self Priming to 7.5 metres
- All Iron, All Bronze and All Stainless Steel construction
- Flows to 80 l/s
- Heads to 160m
- Handle temperatures from -40oC to 90oC depending on model
- Single and double mechanical seals available
Ask Our Team
The Gorman-Rupp 80 Series range of self priming centrifugal grey water are heavy duty 24/7, quick priming “work horses” for industry. With multi-vane impellers and a “straight-in” suction design, the 80 Series pumps deliver high efficiencies and quick positive self priming.
Advantages include:
- Ability to mount high and dry above the wet well [not in it]
- Capital cost savings over wet well/ dry well constructions
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
Ask Our Team
The EDUR range of Industry Bloc close-coupled centrifugal pumps are ideal for pumping water and other clean and slightly polluted fluids. They are compact in size, and available in a variety of materials of construction including cast iron, bronze and stainless steel.
Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.
Advantages include:
- All Iron, All Bronze and All Stainless Steel construction
- Flows to 165 l/s
- Heads to 90m
- Handle temperatures from -40oC to 140oC depending on model
- Handle viscosity to 115 cSt
- Handle solids content to 15%
- Single and double mechanical seals available
- Surface Mounted Pump
Ask Our Team
The EDUR range of multi-stage centrifugal pumps can deliver flows to 45 litres per second and heads to 300 metres. They are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel and Super-Duplex) enabling them to pump corrosive fluids including seawater. These centrifugal pumps are ideal for booster systems, boiler feed and condensate systems, washing plants, water treatment and hardening systems.
Pumps can be close or long-coupled. Advantages include:
- All Iron, All Bronze, All Stainless Steel and Super-Duplex construction
- Flows to 45 l/s
- Heads to 300m
- Handle temperatures from -40oC to 160oC depending on model
- Single and double mechanical seals available along with gland packing and water cooled gland packing
Ask Our Team
The Gorman-Rupp VG and VGH Series range of standard centrifugal pumps come in two styles. A general purpose style (VG) for clean liquids and a heavy duty style (VGH) for clean petroleum fluids as well as dirty water and mild abrasives.
The VG centrifugal pump has a cast iron casing and impeller, whereas the VGH centrifugal pump has a ductile iron casing, cast iron impeller with replaceable iron wear rings and a tungsten carbide/silicon carbide cartridge type mechanical seal with fluorocarbon elastomers.
Advantages include:
- High efficiency
- Ethanol capable [with a seal upgrade]
- Low lifecycle costs
- Hand primer kit available in some centrifugal pump models
Ask Our Team
The EDUR range of Stainless Bloc close-coupled centrifugal pumps are ideal for transporting corrosive fluids. Motors are either 2 pole or 4 pole, with IP55 enclosures, and insulation class F.
Advantages include:
- Full stainless steel construction
- Flows to 60 l/s
- Heads to 90m
- Handle temperatures from -20oC to 110oC depending on model
- Handle viscosity to 115 cSt
- Handle solids content to 15%
- Handle solids to 40mm depending on the model of centrifugal pump
- Single and double mechanical seals available
Download the Brochure | Ask Our Team
The JS Lamella pump from JS Poputec is used for transporting solid materials such as pre-broken bone and offal at abattoirs and other meat processing plants.
The bone and offal pump is used instead of more conventional methods such as screw conveyors, compressed air “blow-tank” systems and manual systems (bins and fork lifts).
Advantages include:
- Keeping the product in an enclosed pipeline system (compared to a screw conveyor or manual system) reduces the chances of contamination.
- Reduced labour costs to operate (compared to a blow tank or manual system).
- Less maintenance than a screw conveyor or alternative pump system.
The JS Lamella system can deliver product effectively, cleanly, and minimise costs.
Ask Our Team
The EDUR range of Multistage Liquid Gas (LPG) pumps can deliver flows to 45 l/s and pressures to 14 bar (to go to 90 l/s and 40 bar in the not too distant future). These technically superior pumps deliver high efficiencies, low noise levels, low NPSH and reduced axial and radial forces. They also offer less wear than sliding vane pumps and higher efficiencies than side channel pumps. Pumps are ideal for transfer systems and for loading and unloading ships, rail cars, trucks etc.
Motors are 2 pole with IP55 enclosures, and insulation class F and conform to ATEX 94/9/EC. Advantages include:
Advantages include:
- Nodular Cast Iron or All Stainless Steel construction
- Able to handle liquid-gas mixtures (outgassing)
- Flows to 45 l/s (soon to double)
- Heads to 23 bar (soon to go to 40 bar)
- Handle temperatures from -40oC to 110oC depending on model
- Balanced Single and double mechanical seals available as well as magnetic coupling
Motor options include:
- ATEX 112G EExe llT3
- ATEX 112G EExde llCT4
Certificates and Reports include:
- Declaration of conformity according 94/9/EC (ATEX)
- Gost-R Certification
- Test Certificate DIN EN 10204 – 2.2
- Acceptance Test Certificate DIN EN 10204 – 3.1
Ask Our Team
The Gorman-Rupp Roto-Prime range of self priming centrifugal pumps is specifically designed for pumping petroleum products, petrochemicals and solvents. The Roto-Prime fuel pump incorporates a variable capacity vane [priming] pump which quickly and automatically evacuates air and vapour from suction lines, making them ideal for loading, off-loading transports and stripping hoses.
Advantages include:
- Ability to mount high and dry above the liquid source
- Eliminates vapour lock or air lock in suction lines
- Easy access for monitoring or service
Ask Our Team
The Gorman-Rupp O Series pumps were originally designed for handling petroleum products. Later, O Series pumps were introduced into the industrial market for effective handling of solvents and similar liquids, as well as excellent clean liquids handling. The straight-in-suction design without a check valve eliminated entrance restrictions provides quick, reliable self-priming with few moving parts offering saving through minimal maintenance and increased efficiency. The O Series has a variety of seal configurations to choose from allowing it to handle a number of different liquids.
Advantages include:
- Capital cost savings over wet well/ dry well constructions
- Low cost of ownership
- Easy access for monitoring or service
Ask Our Team
Emergency bypass auto-start sewage pump units are designed to operate when mains power is unavailable because of storms or other forces. They are available with flow rates from 3 l/s through to 250 l/s, are diesel powered and mounted in a vandal resistant acoustic enclosure.
They have a completely independent level control system and take over when the main pumps in the station are unable to pump due to power failure, control panel failure, pump failure or for any other reason.
Gorman-Rupp emergency auto-start pump units are used instead of emergency power generation at pump stations because of their versatility.
Advantages include:
- Pumping capability when power is unavailable
- Use smaller engines than generators because starting current does not need to be factored in
- Can be used as the standby pump for the main station if one of the submersible pumps is down for repairs
- No load banks or automatic switch gear are required
- No modifications to existing control panels are necessary
- Hi-tech controls include telemetry warnings for faults and low fuel
- Can be fitted with Gorman-Rupp Ultra V Series, Super T Series or PA Series grey water pumps.
Ask Our Team
The Gorman-Rupp ES 200×200 is a low profile packaged pump station with a specially designed fibreglass enclosure that is perfectly adapted to house all of the mechanical and electrical equipment for the complete station. The (two) sewage pumps in the station can either be Gorman-Rupp’s Super T or Ultra V Series sewage pumps.
The interior layout of the enclosures is designed to facilitate any service work that needs to be done on the sewape pumps or valves. Flows to 75 l/s for a single pump can be achieved, while the station sits on a footprint of 2.1m x 2.1m.
Advantages include:
- Lower civil costs/ engineering
- Stations are fully equipped and ready to “plug and play”
- Lower operational costs
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Intuitive control system
- New advanced level control system keeps electrical equipment out of the wet well
- Specially developed acoustic system keeps noise down to a whisper (43 dB(A) at 1.0m)
- Available with several different external appearance options
- All components within Gorman-Rupp packaged pump stations are warranted for 5 years
- Can work with the revolutionary Self Cleaning Sump (SCS) for a complete sustainable system
Ask Our Team
The Gorman-Rupp Self Cleaning Sump (SCS) is a revolution in wastewater pump station wet well design. The SCS is an easy to install sloping collector pipe (fabricated from heavy duty HDPE) that is directly connected to the control manhole, and used in conjunction with Gorman-Rupp self priming sewage pumps.
The Self Cleaning Sump has been designed to replace the conventional cylindrical wet well and to remove the flaws associated with this current design. The negatives of the conventional design are considered to be the amount of intervention (number of personnel per call and the number of calls) required with these stations, the risks to operators associated with accessing the wet well for blockage removal and maintenance, and the longevity and reliability of equipment.
The aim of the SCS design is to:
- Eliminate blockages caused by the build-up of rags and stringy matter
- Eliminate sediment build-up
- Eliminate fat and grease build-up
- Eliminate air entrainment
- Reduce energy consumption
- Greatly reduce blockages in pumps
- Greatly reduce maintenance costs
- Reduce civil costs
- Used in conjunction with Gorman-Rupp Ultra V Series and Super T Series Grey Water Pumps
Download the Brochure | Ask Our Team
The RamParts P Series range of single acting air driven diaphragm sludge pumps and slurry pumps take over where other pumps in Australia fail.
In applications where progressive cavity pumps or lobe pumps wear prematurely or double diaphragm pumps struggle, RamParts extra heavy duty sludge pumps step up.
Advantages include:
- Advanced DRC (separate) Controllers
- Self priming to 6 metres
- Handle slurries to 70% solids by volume
- Superior solids handling design
- Run Dry indefinitely
- Dead-head without damage
- Re-build pumps for 15% of their purchase price (not 80% like some PD pumps)
- Improved maintenance features to greatly reduce maintenance time and costs
- A variety of materials of construction to handle abrasive and/or corrosive fluids, including a variety of diaphragm materials and sludge pump linings
- Automatic filter press feed control options
- Flows to 1200 litres per minute with models from 1½” through to 6”
- Heads to 65m
Download Data Sheets | Ask Our Team
The Gorman-Rupp D Series range of mechanical diaphragm pumps are designed to pump sludge, slurry, mud and other heavy liquids. Both models (3D and 4D) are self-priming sludge pumps and available as “bare shaft” diaphragm pumps or mounted with electric motors.
Advantages include:
- Self priming to 7.6m
- DuraBlue 1000 diaphragms for the 3” (75mm) pump
- Neoprene diaphragms for the 4” (100mm) pump
- Built-in flap valves
- Handles 57mm spherical solids
- Wheel kit standard on both models of sludge pump
- Available in 3” (75mm) and 4” (100mm) sizes
Ask Our Team
The Gorman-Rupp PAH Series of prime assist (also known as dry prime or auto prime) centrifugal pumps are capable of delivering high heads and/or high flows for applications from wastewater bypassing to mine dewatering.
Field adjustable running clearances mean this pump can be kept at peak efficiency and left in the field for longer (instead of having a trip back to the workshop for a wear ring change).
Advantages include:
- Ability to mount high and dry above the water (not in it)(to 7.6m)
- Low cost of ownership
- Greatly reduced OH&S issues
- Easy access for monitoring or service
- Improved maintenance features to greatly reduce maintenance time and costs
- A variety of materials of construction to handle abrasive and/or corrosive fluids
- Any engine brand required by the customer
- Choice of skid or trailer mounted configuration
Ask Our Team
The SE1½B3-E.33 12V Gorman-Rupp pump is a 12 volt submersible pump, designed for use with a truck battery as a back-up unit in the event of power failure, or use in remote locations where electricity is not available.
Advantages include:
- Lightweight (approx 15kg) aluminium construction
- 25kW 12 volt electric motor
- Operates approximately 45 minutes on fully charged 55 amp-hour battery
- 9m of battery cable with on/off switch supplied as standard
- Built-in carry handle
- 38mm discharge port
- Steel strainer built into submersible pump
- Thermal overload protected
Ask Our Team
6500 Series® end suction centrifugal pumps are based on the proven technology of Gorman-Rupp’s Prime Aire® and Prime Aire Plus® priming-assisted pump models. The 6500 Series was designed to extend Gorman-Rupp’s end suction centrifugal pump offering and to better serve applications where a suction lift is not required. A double volute mitigates shaft breakage and extends the life of the mechanical seals, wear rings and bearings, all while maintaining hydraulic efficiency, while a side access port allows for easy access to pump interior for inspection and clean out while the pusher bolt capability assists in the removal of the suction flange.
Advantages include:
- High efficiency
- Alloy steel shafts with stainless steel options
- Dual sight gauges for bearing and seal cavities
- Smart Scroll® indexable discharge location
- Atmospheric vent
- Oversized bearings for longer bearing life
- Double volute on larger models
- Solids-handing models include side access for inspection and clean out
Ask Our Team
The HO3/4A4-36DK Gorman-Rupp Pump is a high quality cast iron hand oscillating drum pump designed for the transfer of and dispensing of lubricating oils and other non-corrosive liquids which are compatible with pump component materials.
Advantages include:
- Suction lift up to 4.5 metres
- Accurate measurement of fluids being pumped (0.38 litres per stroke)
- 23 litres per minute capacity (at 60 strokes per minute)
- Supplied with 1200mm of suction tube with 2” (50mm) bung adaptor
- Maximum pressure of 50 psi
- Maximum temperature of 48oC
- Buna-N Seal, Bronze Valves, Fibre Gaskets
- 19mm suction and discharge tube
Ask Our Team
The Gorman-Rupp engine driven pump is designed for applications which require high flow efficiency (even if heads are higher) and solids handling capability. Unlike the pressed aluminium housings with internal volutes, these Gorman-Rupp pumps are constructed of heavy duty sand cast aluminium components.
Advantages include:
- Suction lifts to 7.6 metres
- Petrol engine or diesel drive
- 2”, 3” and 4” sizes available
- Handle large solids (up to 50mm for the 4” pump)
- Flows to 38 litres per second
- Heads to 30 metres
- Removable cover-plate to access pump internals for inspection and/or blockage removal