Hydro Innovations-Self Priming Centrifugal Wastewater Pumps Australia

80 Series Self Priming Pumps

Gorman-Rupp-80's-Series-Close-Coupled-Self-Priming-Pump
80 Series Self Priming Pump

80 Series Self Priming Pumps

Ask Our Team

The Gorman-Rupp 80 Series range of self priming centrifugal grey water are heavy duty 24/7, quick priming “work horses” for industry. With multi-vane impellers and a “straight-in” suction design, the 80 Series pumps deliver high efficiencies and quick positive self priming.

Advantages include:

  • Ability to mount high and dry above the wet well [not in it]
  • Capital cost savings over wet well/ dry well constructions
  • Low cost of ownership
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
Ask Our Team
Categories: , ,

Watch Videos »

View Projects »

Download Data Sheets »

Check Performance Specs »

Explore Features/Benefits »

Videos

Watch videos sub heading goes here to introduce the videos. The ABC pump is especially equipped for ABC industry, XYZ industry, and versatile for something else.

Why Choose Above Ground Pumps?

Gorman-Rupp above ground pumps are safer, easier to operate and maintain and are more cost effective than a conventional submersible pump system.

With Gorman-Rupp Above ground pumps:

  • Installation and maintenance is simple and cost effective
  • Only 1 operator is needed to maintain the pump
  • No wet well is needed

See how to convert your system to a Gorman-Rupp above ground system. Ask Our team »

Why Choose a Bank Mounted Pump?

Venturi bank mounted systems are simple, safe and cost effective to operate. This video shows a Venturi Aerator and a Gorman-Rupp 86B3 wastewater pump at an abattoir wastewater lagoon.

Benefits of this bank mounted system:

  • Easy maintenance
  • Safe for operators
  • Effective results for multiple applications

See how Venturi can solve your aeration needs. Ask Our team »

Our expert team is standing by for any questions you have about how best to configure your pump system.

Ask Our Team

Back to Top

Back to Top

Data Sheets

Download the specifications to find the perfect pump for your project:

Pump Construction

Cast Iron

1″ (38mm) &
2″ (50mm)

3″ (76 mm)

4″ (102 mm)

6″ ( 152 mm)

8″ (203 mm)

81 1/2E3-B
82D3-B
83A3-B
83B3-B
84A3-B
84B3-B
86A3-B
86B3-B
88A3-B
88B3-B
82E3-B
82H3-B

CD4MCu

82H65-B

Ready to build the perfect pump system for your project? We’re standing by to help.

Get a Quote

Back to Top

80 Series Grey Water Pump Performance

Key reasons the 80-series is considered an industry “work horse.”

Flows: 3 l/s – 100 l/s

Heads: 5m – 60m

Solids: to 60mm

Size: 1-1/4″, 1-1/2″, 2″, 3″, 4″, 6″ + 8″

Priming: Self-priming. Not re-primer

Application: Effluent, Grey Water and Dirty Water + Fuel

80 Series Self Priming Pump Performance Specs
80 Series Self Priming Pump Performance Specs

Back to Top

Special Features and Pump Benefits

Features that make the 80 Series pumps your heavy duty quick priming “work horse.”

Multiple Seal Options

80 Series pumps are available with Gorman-Rupp grease seal, mechanical shaft seal and packing gland seal, depending on pump application.

High Efficiency Impeller

Multi-vane open impeller is designed for high efficiency. Impeller will handle up to 2-3/8″ (60 mm) solids, depending on fuel pump model.

Replaceable Wearplate

Replaceable wearplate provides maximum operating efficiency at all times. No expensive castings to replace. Extra-thick construction for life.

Hydro Innovations is proud to distribute a broad range of quality, reliable and industry-leading industrial pumps and aerators.

We are also delighted to share that Hydro Innovations is proud to be the exclusive distributor of Gorman-Rupp Pumps.

Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, and invests heavily in R&D, and in training for their international representatives – like Hydro Innovations.

This puts us in an excellent position to make the very best recommendations for our Australian customers.

Our other suppliers, Ragazzini of Italy and EDUR of Germany, are also world leaders in their respective technologies (Peristaltic Pumps – Ragazzini, and Specialist centrifugal pumps – EDUR).

We carry a very large inventory of pumps and spare parts for all of these brands, to help us to deliver industry-leading service.

Back to Top

Our Team is available to answer your pump query within the hour

Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.

Email

or Call

(02) 9898 1800

Monday – Friday
9am – 5pm
Australia Wide

Back to Top

More Pumps, Aerators, and Accessories from Hydro Innovations

Related products

EDUR-Liquefied Gas Pumps_NHKE_03_web
EDUR LPG Transfer Pumps – high efficiencies and low noise

Ask Our Team

The EDUR range of Multistage Liquid Gas (LPG) pumps can deliver flows to 45 l/s and pressures to 14 bar (to go to 90 l/s and 40 bar in the not too distant future). These technically superior pumps deliver high efficiencies, low noise levels, low NPSH and reduced axial and radial forces. They also offer less wear than sliding vane pumps and higher efficiencies than side channel pumps. Pumps are ideal for transfer systems and for loading and unloading ships, rail cars, trucks etc.

Motors are 2 pole with IP55 enclosures, and insulation class F and conform to ATEX 94/9/EC. Advantages include:

Advantages include:

  • Nodular Cast Iron or All Stainless Steel construction
  • Able to handle liquid-gas mixtures (outgassing)
  • Flows to 45 l/s (soon to double)
  • Heads to 23 bar (soon to go to 40 bar)
  • Handle temperatures from -40oC to 110oC depending on model
  • Balanced Single and double mechanical seals available as well as magnetic coupling

Motor options include:

  • ATEX 112G EExe llT3
  • ATEX 112G EExde llCT4

Certificates and Reports include:

  • Declaration of conformity according 94/9/EC (ATEX)
  • Gost-R Certification
  • Test Certificate DIN EN 10204 – 2.2
  • Acceptance Test Certificate DIN EN 10204 – 3.1

Ask Our Team

ES Auto-Start Sewage Pump Station
ES Auto-Start Self priming pump station

Ask Our Team

The Gorman-Rupp ES Auto-Start sewage pump stations are the same as any other self priming pump station, except they have an auxiliary combustion engine to drive one or more of the pumps in times of power outage. They are pre-engineered and factory tested packaged units with one, two or more  pumps. The motors, auxiliary engine/s, all the valves, interconnecting piping etc are all supplied as a package, inclusive of state-of-the-art purpose built controls and liquid level control systems.

The pumps in the station can either be Gorman-Rupp’s Super T or Ultra V Series pumps. Flows to 250 l/s for a single pump can be achieved, and this can be expanded when using self priming pumps, because only the suction line needs to be in the wet well [not whole pumps], so that 3 or more pumps can be utilised to deliver peak efficiencies when pumping ADWF [average dry weather flow] right through to peak wet weather flows. A variety of enclosures are available to house the pumping equipment.

Advantages include:

  • Lower civil costs/ engineering
  • Pump stations are fully equipped and ready to “plug and play”
  • Lower operational costs
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Intuitive control system
  • New advanced-level control system keeps electrical equipment out of the wet well
  • Able to solve many application problems, including those with steep system head curves
  • All components within Gorman-Rupp packaged pump stations are warranted for 5 years
  • Can work with the revolutionary Self Cleaning Sump (SCS) for a complete sustainable system
Ask Our Team
Gprman-Rupp-Super-o-v2
O Series Basic Pump – fuels, solvents and similar fluids

Ask Our Team

The Gorman-Rupp O Series pumps were originally designed for handling petroleum products. Later, O Series pumps were introduced into the industrial market for effective handling of solvents and similar liquids, as well as excellent clean liquids handling. The straight-in-suction design without a check valve eliminated entrance restrictions provides quick, reliable self-priming with few moving parts offering saving through minimal maintenance and increased efficiency. The O Series has a variety of seal configurations to choose from allowing it to handle a number of different liquids.

Advantages include:

  • Capital cost savings over wet well/ dry well constructions
  • Low cost of ownership
  • Easy access for monitoring or service
Ask Our Team
Engitank_Super T_1
Gorman-Rupp Engine Driven Pump- Super T

Download the Brochure | Ask Our Team

The Gorman-Rupp Super T Series self-priming dewatering pump has been the world benchmark for this technology since 1963 (>55 years). These engine driven pumps are direct coupled to diesel engines through flexible flywheel couplings to ensure perfect alignment between pump and engine. These are mounted onto our “engitank” platform. This platform includes an extra heavy duty fuel tank base with a 450 litre capacity, lifting points on 4 corners, fork lift pockets, and a central lifting frame. A sheet-metal roof is provided to help protect the engine from the elements.

Advantages include:

  • Simple priming system. Just fill casing with water.
  • No complicated “add-on” priming systems.
  • Pump solid particles up to 76mm dia
  • Pump stringy materials [rags, bags and wipes] with Eradicator technology
  • Greatly reduced OH&S issues
  • Easy access for monitoring or service
  • Advanced safety features to protect operators
  • Improved maintenance features to greatly reduce maintenance time and costs, with externally adjustable clearances.
  • A variety of materials of construction to handle abrasive and/or corrosive fluids
  • Any engine brand required by the customer.
  • Choice of skid or trailer mounted configuration
Ask the Team
GR 6500 series main_1
6500 Series Centrifugal Pumps

Ask Our Team

6500 Series® end suction centrifugal pumps are based on the proven technology of Gorman-Rupp’s Prime Aire® and Prime Aire Plus® priming-assisted pump models. The 6500 Series was designed to extend Gorman-Rupp’s end suction centrifugal pump offering and to better serve applications where a suction lift is not required.  A double volute mitigates shaft breakage and extends the life of the mechanical seals, wear rings and bearings, all while maintaining hydraulic efficiency, while a side access port allows for easy access to pump interior for inspection and clean out while the pusher bolt capability assists in the removal of the suction flange.

Advantages include:

  • High efficiency
  • Alloy steel shafts with stainless steel options
  • Dual sight gauges for bearing and seal cavities
  • Smart Scroll® indexable discharge location
  • Atmospheric vent
  • Oversized bearings for longer bearing life
  • Double volute on larger models
  • Solids-handing models include side access for inspection and clean out
Ask Our Team
ho-hand-pump-gorman-rupp-drum-pump
HO Hand Pump – hand oscillating drum pump

Ask Our Team

The HO3/4A4-36DK Gorman-Rupp Pump is a high quality cast iron hand oscillating drum pump designed for the transfer of and dispensing of lubricating oils and other non-corrosive liquids which are compatible with pump component materials.

Advantages include:

  • Suction lift up to 4.5 metres
  • Accurate measurement of fluids being pumped (0.38 litres per stroke)
  • 23 litres per minute capacity (at 60 strokes per minute)
  • Supplied with 1200mm of suction tube with 2” (50mm) bung adaptor
  • Maximum pressure of 50 psi
  • Maximum temperature of 48oC
  • Buna-N Seal, Bronze Valves, Fibre Gaskets
  • 19mm suction and discharge tube
Ask Our Team