EDUR Multistage Pump - Compact High Pressures

EDUR Multistage Pump – Compact High Pressures

Download the Brochure | Ask Our Team

The EDUR range of multi-stage centrifugal pumps can deliver flows to 45 litres per second and heads to 300 metres. They are also available in a variety of materials (Cast Iron, All Bronze, All Stainless Steel and Super-Duplex) enabling them to pump corrosive fluids including seawater. These centrifugal pumps are ideal for booster systems, boiler feed and condensate systems, washing plants, water treatment and hardening systems.

Pumps can be close or long-coupled. Advantages include:

  • All Iron, All Bronze, All Stainless Steel and Super-Duplex construction
  • Flows to 16 l/s
  • Head: max. 300 m
  • Discharge pressure: max. 21,4 bar
  • Operating pressure: max. 40 bar
  • Handle temperatures -50 °C to 160 °C
  • Viscosity: The NH series are able to handle media with a viscosity up to 200 cSt, while the other series of multistage centrifugal pumps can handle viscosities up to 115 cSt
  • Single and double mechanical seals available along with gland packing and water cooled gland packing

Videos

Watch how EDUR pumps use sustainable energy saving technology:

See EDUR’s Manufacturing Facility and Process

See where the  leading edge technology starts,  quality, sustainable manufacturing through to the finished product in this EDUR Corporate video

. Ask Our team »

Our expert team is standing by for any questions you have about how best to configure your pump system.

Back to Top

Cedar Meats Australia very happy with Hydro Innovations pump solutions
Application: DAF
Industry: Abattoir
Region: VIC
EDUR-DAF- simplify your DAF system

Project Showcase: Cedar Meats

Reduced energy consumption with innovative DAF Pump for Waste Water Management

Cedars Meats were impressed with the simplicity of the dissolved air flotation system and promptly arranged the purchase of an EDUR DAF pump. They have been pleased with the positive results, which include:

  • A higher rate of solids removed
  • less power used for the job (reducing power costs)
  • less complicated controls
  • low maintenance future ahead for the system

 

Mr Yogesh Mistry
Chief Engineer at Cedar Meats

Back to Top

Pump Performance Specs

Unlock the potential of multistage centrifugal pumps across a spectrum of industries including water technology, energy, industrial cleaning, cooling, and liquefied gas applications. These pumps excel in scenarios demanding elevated pumping pressures for the conveyance of both pure and mildly contaminated liquids.

Ready to build the perfect pump system for your project? We’re standing by to help.

Back to Top

Special Features and Pump Benefits

What’s the coolest aspect about the features and pump benefits? What pain point do these address?

solids-handling-pump-impeller-gorman-rupp

Solids-Handling Impeller

The heavy-duty balanced, two-vane, semi-open ductile iron impellers provide maximum life. Pump-out vanes on the back shroud reduce foreign material build-up behind the impeller, minimising pressure on the seal and maximising bearing life.

patented-cartridge-seal-for-gorman-rupp-pump

Patented Cartridge Seal

Gorman-Rupp’s double floating, self aligning, oil-lubricated mechanical seal is specifically designed for abrasive and/or trash handling applications. The silicon carbide faces and extra large seal oil chamber provide superior dry-run capability. The patented cartridge design also allows for accurate and easy installation.

gorman-rupp-removable-rotating-assembly

Removable Rotating Assembly

Gorman-Rupp Super T series wastewater pumps are designed with a removable rotating element. This assembly can be removed and replaced in minutes without disconnecting piping or disturbing motor alignment.

gorman-rupp-removable-coverplate

Removable Cover Plate

All Super T series pumps have a large removable cover plate for accessing pump internals for the quick removal of blockages. Check valves, impellers and wear plates can also be replaced through this cover.

Back to Top

Our Team is available to answer your pump query within the hour

Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.

Email

or Call

(02) 9898 1800

Monday – Friday
9am – 5pm
Australia Wide

Hydro Innovations is proud to distribute a broad range of quality, reliable and industry-leading industrial pumps and aerators.

We are also delighted to share that Hydro Innovations is proud to be the exclusive distributor of Gorman-Rupp Pumps.

Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, and invests heavily in R&D, and in training for their international representatives – like Hydro Innovations.

This puts us in an excellent position to make the very best recommendations for our Australian customers.

Our other suppliers, Ragazzini of Italy and EDUR of Germany, are also world leaders in their respective technologies (Peristaltic Pumps – Ragazzini, and Specialist centrifugal pumps – EDUR).

We carry a very large inventory of pumps and spare parts for all of these brands, to help us to deliver industry-leading service.

Back to Top

Latest Posts from Hydro Innovations

Checkout the latest in pumping news.

More Pumps, Aerators, and Accessories from Hydro Innovations