Videos
Watch how Gorman-Rupp Super-T Series pumps can handle the toughest applications
Watch what happens when Eric shoves a rubber chicken into the pipeline of a Gorman-Rupp Super T series pump with Eradicator Superior Solids Handling capabilities:
With Gorman-Rupp Eradicator:
- Passes up to 76mm spherical solids
- Only 1 operator is needed to maintain the pump
- Fewer chokes and blockages
- Available to retrofit
Industrial Pump Specialist Garry Grant explains the difference between Gorman-Rupp wastewater pumps and the alternative pump. Garry explains all the features and benefits of Gorman-Rupp pumps and shows why they are the better option when choosing a wastewater pump.
With Gorman-Rupp Above ground pumps:
- Installation and maintenance is simple and cost-effective
- Only 1 operator is needed to maintain the pump
- No wet well is needed
Gorman-Rupp above ground pumps are safer, easier to operate and maintain and are more cost-effective than a conventional submersible pump system.
With Gorman-Rupp Above ground pumps:
- Installation and maintenance is simple and cost effective
- Only 1 operator is needed to maintain the pump
- No wet well is needed
See how to convert your system to a Gorman-Rupp above ground system.
Gorman-Rupp wastewater pumps are now even more capable of pumping solids laden wastewater including stringy solids, rags and wet wipes using the Eradicator unit, which can be retrofitted to existing pumps or added to new pump configurations. Watch how the Eradicator works in this demonstration video
- easily pump solids laden wastewater
- Safe for operators
- easy removable inspection plate
Our expert team is standing by for any questions you have about how best to configure your pump system.
Application: STP
Industry: Municipal
Region: NSW
Project Showcase: Lismore City Council
Municipality looks to Hydro Innovations to solve its wastewater challenge.
The Lismore City Council sewage pump would choke on a daily basis during its job of turning over the digester. They were using a Gorman-Rupp T3A3S-B self-priming pump, but the sheer number of rags made it very difficult for even this excellent solids-handling sewage pump to pass all the rags, all the time.
The new Eradicator system was retrofitted to the existing Gorman-Rupp T3. The sludge pump then ran for 3 months without a single choke. In the same period, they would have expected to have between 12 and 24 chokes. Matt, Brad and their colleagues at the council were very pleased with the result.
Pump Construction
4″ [100mm]
6″ [150mm]
8″ [200mm]
Standard (Cast Iron)
HDI Fitted Construction
316SS Fitted
Ready to build the perfect pump system for your project? We’re standing by to help.
Super T Series Eradicator Performance
Superior solids-handling, medium head pumps with reprime capability
Gorman-Rupp Super T Series self priming centrifugal pumps are capable of passing 76mm spherical solids [in 4” size and up] through all internal passages withing the pump (not just the impeller).
Flows: 5 l/s – 300 l/s
Heads: 5m – 40m
Solids: to 76mm spheres + Stringy to Very Stringy
Size: 2″, 3″, 4″, 6″, 8″, 10″ + 12″
Priming: Guaranteed Re-Primer
Application: Effluent to Trash and Sewage
Special Features and Pump Benefits
Super T with Eradicator has less chokes and blockages, and is easy to maintain:
Solids-Handling Impeller
The heavy-duty balanced, two-vane, semi-open ductile iron impellers provide maximum life. Pump-out vanes on the back shroud reduce foreign material build-up behind the impeller, minimising pressure on the seal and maximising bearing life.
Patented Cartridge Seal
Gorman-Rupp’s double floating, self aligning, oil-lubricated mechanical seal is specifically designed for abrasive and/or trash handling applications. The silicon carbide faces and extra large seal oil chamber provide superior dry-run capability. The patented cartridge design also allows for accurate and easy installation.
Removable Rotating Assembly
Gorman-Rupp Super T series wastewater pumps are designed with a removable rotating element. This assembly can be removed and replaced in minutes without disconnecting piping or disturbing motor alignment.
Removable Cover Plate
All Super T series pumps have a large removable cover plate for accessing pump internals for the quick removal of blockages. Check valves, impellers and wear plates can also be replaced through this cover.
Our Team is available to answer your pump query within the hour
Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.
or Call
(02) 9898 1800
Monday – Friday
9am – 5pm
Australia Wide
Hydro Innovations is proud to distribute a broad range of quality, reliable and industry-leading industrial pumps and aerators.
We are also delighted to share that Hydro Innovations is proud to be the exclusive distributor of Gorman-Rupp Pumps.
Gorman-Rupp is the world leader in self-priming centrifugal wastewater pump technology, and invests heavily in R&D, and in training for their international representatives – like Hydro Innovations.
This puts us in an excellent position to make the very best recommendations for our Australian customers.
Our other suppliers, Ragazzini of Italy and EDUR of Germany, are also world leaders in their respective technologies (Peristaltic Pumps – Ragazzini, and Specialist centrifugal pumps – EDUR).
We carry a very large inventory of pumps and spare parts for all of these brands, to help us to deliver industry-leading service.
