RamParts Series P – for your heavy duty applications.
Extra Heavy Duty for Your Toughest Applications
The rugged construction and extra-thick casing of RamParts air-driven diaphragm pumps stand up to the abuses of the most demanding sludge and slurry applications.
They overcome the high-wear problem commonly found in double diaphragm and progressive cavity pumps.
Air-driven diaphragm pumps are capable of operating dry on suction lifts up to 20 feet (6.5 m) and handling liquids with solids contents up to approximately 70%.
Depending on pump model, they will pass up to 3 (76 mm) diameter spherical solids. (Solids size determined by check valve type.)
- Rugged construction
- Extra-thick casing
- Extra heavy duty for your most demanding applications
Industry: Food & Beverage
Project Showcase: One Harvest
Food manufacturer looks to Hydro Innovations to solve its wastewater challenge.
Feedback from the plant was “We couldn’t be happier with this pump and it’s become the standard that we will use going forward” and “One of the best things we have done”.
The pump has performed so well, the plant is instigating a policy to replace their other submersible pumps with Gorman-Rupp self-priming pumps.
RamParts Series P Perfomance
Key reasons the RamParts Series P diaphragm pump is your solution for extra heavy duty applications.
Flows: 0.5 l/s – 20 l/s
Heads: 3m – 60m
Solids: to 76mm
Size: 1-1/2″, 2″, 3″, 4″+ 6″
Priming: Self-Priming Air Operated Diaphragm Pumps
Application: Specialists Sludge Pump and Slurry Pump
Special Features and Pump Benefits
Heavy duty features for extra heavy duty applications.
The rugged construction and extra-thick pump casing of Ramparts Air Driven sludge pumps stand up to the abuses of the most demanding sludge pump and slurry pump applications. They overcome the “high wear” problem commonly found in double diaphragm and progressive cavity pumps. They are capable of operating dry, on suction lifts up to 6 metres, and handling high solids content up to approximately 70%.
Depending on the sludge pump model you choose, RamParts Air Driven Diaphragm pumps will handle solids up to 100mm in diameter.. They are designed to handle heavy sludges and slurries in the most hostile environments. These include steel mills, paper mills, mines, chemical plants, food processing plants, refineries, wastewater facilities and hundreds of other applications where other sludge pumps struggle.
Efficient Air Cylinder Design
Air is applied uniformly on top of the diaphragm which causes less resistance than spring-operated cylinders. This reduces stress on the diaphragm. The result is longer diaphragm life, reduced air consumption which saves money over the life of the pump, quieter operation and virtual elimination of muffler icing.
Air Driven Diaphragm pumps have only three moving parts so maintenance and service are minimal. Replacement of pump diaphragm can be accomplished in about one hour without disconnecting piping. Check valves can also be quickly and easily cleaned out using “twist lok” handles. No special tools required.
Our Team is available to answer your pump query within the hour
Hydro’s experts are standing by to help you get the best pump, aerators and genuine spare parts for your specific project.
(02) 9898 1800
Monday – Friday
9am – 5pm
Hydro Innovations is proud to distribute RamParts pumps in Australia.
Hydro Innovations only partners with the highest quality pump manufacturers. We have chosen RamParts for its excellence in construction for the toughest applications. Learn more about RamParts and our other partners »